Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Vicmarc jaws
-
23rd May 2014, 07:04 PM #1GOLD MEMBER
- Join Date
- Jun 2010
- Location
- shoalhaven n.s.w
- Posts
- 1,240
Vicmarc jaws
Do these jaws look like vicmarc? I bought a small box of bits and I mainly wanted the faceplate. I have done some research and I think they they are for the VM120. Any help appreciated
-
23rd May 2014 07:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
23rd May 2014, 07:17 PM #2
Vicmarc Jaws
here is the jaw sizing for the vicmarc jaws
http://www.vicmarc.com/default.asp?contentID=592Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
24th May 2014, 04:57 PM #3
Probably not
The extra holes (besides attachment to body) seem to belong to Apprentice. Craft Supplies advise that these jaws are not interchangeable with other brands. Misfit could include both hole locations and backplane groove format.
http://www.woodturnerscatalog.com/p/...ce-4-Jaw-Chuck
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
24th May 2014, 05:24 PM #4
Similar Threads
-
First Effort with Vicmarc Bowl Jaws
By smidsy in forum WOODTURNING - GENERALReplies: 8Last Post: 21st November 2004, 08:27 PM -
Vicmarc Bowl Jaws
By smidsy in forum WOODTURNING - GENERALReplies: 14Last Post: 20th November 2004, 04:34 PM