Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 33
Thread: The Vicmarc has landed
-
6th April 2013, 01:35 PM #1GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
The Vicmarc has landed
After sitting idle since I received the VL175 on Thursday I've finally had the chance to put it all together. Essentially the lathe itself is ready to go out of the box. Yes, everything arrived boxed up and secured to a pallet. It all looked insanely imposing considering the lathe and stand weigh in at just over 200kg. I had to borrow my neighbour's pallet jack to manoeuvre it all into the shed. The stand was a breeze to put together however the holes to bolt the lathe to the stand were about 1mm out at one end, which I had to drill out. No big deal.
Once the stand was put together, lathe secured and moved into position, the stand rocked about 3 or 4mm on the concrete. I knew the concrete wasn't all that level in the first place so I had cut up some 1.6 gal sheet shims and levelled the lathe with those. The whole lathe is now coplanar and very secure. There is *some* vibration around 2700 to 2800 RPM which I'll look at tomorrow.
First impressions? I've only had one lathe before this (Nova 1624-44) however the whole Vicmarc package oozes class. The castings are superb, motor quiet and I'm going to LOVE the variable speed. I purchased a VM100 scroll chuck which is superb also. I'm also glad I bought the stand rather than make my own bench (thanks Jim C ). Once some wood touches the lathe I'll provide a more in-depth review. But for now, I'm going to give this baby a kiss before I go to bed each night.
I must thank my old man who, at 74, has still got the ability to move and construct with the best of them. Thanks Dad
-Scott
-
6th April 2013 01:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th April 2013, 01:42 PM #2
Nice one mate now get on it and turn!
DANGER!!!!I'm Dyslexic Spelling may offend!!!!!
-
6th April 2013, 02:33 PM #3
The Vicmarc has landed
Good stuff Scott but its too clean!!!!
Cheers
DJ
ADMIN
-
6th April 2013, 02:36 PM #4GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
-
6th April 2013, 03:09 PM #5
Way to clean so clean Mrs Marsh would be proud of you.........wheres the
-
6th April 2013, 03:10 PM #6GOLD MEMBER
- Join Date
- Jun 2003
- Location
- Sunbury, Vic
- Age
- 84
- Posts
- 2,718
-
6th April 2013, 04:51 PM #7GOLD MEMBER
- Join Date
- Jun 2010
- Location
- shoalhaven n.s.w
- Posts
- 1,240
very nice! hours of fun ahead of you!
-
6th April 2013, 05:51 PM #8
Well done Scott! Now get to work!!!
Russell (aka Mulgabill)
"It is as it is"
-
6th April 2013, 06:12 PM #9Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
I'm jealous but dont let that bother you!!
Enjoy!!!
-
6th April 2013, 06:20 PM #10Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
6th April 2013, 06:39 PM #11GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
-
6th April 2013, 06:42 PM #12GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
-
6th April 2013, 08:30 PM #13Intermediate Member
- Join Date
- Apr 2008
- Location
- Thomastown 3074
- Posts
- 49
Scott glad to see you have finally got your VL175. I hope that you get as much enjoyment from using it as I do, when I turn mine on. See you on Tues. night all going well
-
6th April 2013, 08:32 PM #14GOLD MEMBER
- Join Date
- Jan 2010
- Location
- Melbourne
- Posts
- 2,636
-
6th April 2013, 08:33 PM #15Intermediate Member
- Join Date
- Apr 2008
- Location
- Thomastown 3074
- Posts
- 49
no its Ian
Similar Threads
-
The #6 has landed
By mic-d in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 31st October 2008, 11:19 PM -
Sierras Have Landed
By Froggie40 in forum WOODTURNING - PEN TURNINGReplies: 0Last Post: 22nd December 2006, 11:59 AM -
Landed that fish
By Penpal in forum WOODTURNING - PEN TURNINGReplies: 2Last Post: 8th December 2006, 10:45 AM -
My Jet has landed ...
By Touchwood in forum WOODTURNING - PEN TURNINGReplies: 11Last Post: 4th December 2006, 08:04 AM -
Landed in my Chardonay...
By Iain in forum NON WOODWORKReplies: 3Last Post: 9th January 2005, 04:07 PM