Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Vicmarc VL200 problem
-
5th September 2016, 04:52 PM #1
Vicmarc VL200 problem
I have a vicmarc VL200 with Fuji FVR E7 invertor.
the problem is that the lathe spins in reverse fine and I can adjust the speed in reverse, but will not spin forward at all. Dead as dodo.
I have checked the little contact switch and that is fine. I have changed the cable from the push switch to the connection block, that is fine.
any ideas? I am wondering if the invertor needs resetting, but I cannot find out how to do it
any help appreciated
-
5th September 2016 04:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
5th September 2016, 08:19 PM #2
Contact Vicmarc direct as marco can help you with this, easier that others trying to diagnose what may be wrong and stuffing things up more
Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
5th September 2016, 08:24 PM #3Senior Member
- Join Date
- Dec 2010
- Location
- Southern Highlands NSW
- Posts
- 444
I agree with Jim, I've found the guys really good to deal with and the prices very reasonable. I dropped a chunk of timber on the variable speed knob of my VL300 - I think it cost about $30 to replace.
-
5th September 2016, 08:25 PM #4
-
5th September 2016, 09:04 PM #5
Similar Threads
-
Vicmarc VL200
By comgreserv in forum WOODTURNING - GENERALReplies: 2Last Post: 8th November 2011, 03:33 PM -
Vicmarc VL200 on e-pay
By Enfield Guy in forum WOODTURNING - GENERALReplies: 6Last Post: 13th March 2010, 12:54 PM -
Vicmarc VL200 on Ebay
By Poloris in forum WOODTURNING - GENERALReplies: 72Last Post: 27th January 2010, 10:36 AM