Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Vicmarc VM100 chuck
-
24th September 2014, 02:18 AM #1New Member
- Join Date
- Sep 2014
- Location
- Notts
- Posts
- 2
Vicmarc VM100 chuck
Hiya Guys,
Hope I'm doing this right, as its my first time on here?
I'm trying to dismantle my Vicmarc VM100 chuck for servicing. Cant figure out how to get the 2 pins out which hold the 2 pinions in place. I've seen a youtube video, which shows them being removed with an allen key, but there are no allen key sockets on the tops of my pins? I've tried gently tapping the body of the chuck to see if they simply drop out, but no success.
Any ideas please
Regards- Reebs
-
24th September 2014 02:18 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th September 2014, 08:32 AM #2Intermediate Member
- Join Date
- Feb 2008
- Location
- Under a rock.
- Posts
- 32
-
24th September 2014, 06:56 PM #3New Member
- Join Date
- Sep 2014
- Location
- Notts
- Posts
- 2
Hiya,
Thanks for the link to the youtube video, but that's the one I've seen, which shows removal of pins using an allen key.
Regards - reebs
-
24th September 2014, 11:06 PM #4
-
24th September 2014, 11:13 PM #5SENIOR MEMBER
- Join Date
- Jul 2014
- Location
- Gold Coast Australia
- Age
- 67
- Posts
- 519
On the Vicmarc facebook page there is a video down the page that shows how to rebuild a chuck https://www.facebook.com/vicmarcmachinery?fref=ts
Similar Threads
-
Vicmarc VM100 Chuck Failure
By steadyeddie in forum WOODTURNING - GENERALReplies: 8Last Post: 1st February 2011, 10:59 PM -
VM100 Chuck Maintenace?
By orificiam in forum WOODTURNING - GENERALReplies: 6Last Post: 17th March 2009, 09:56 PM -
VM100 chuck on a GMC
By robatman in forum WOODTURNING - GENERALReplies: 9Last Post: 24th November 2006, 10:47 PM -
Cleaning/Maintenance of VM100 chuck
By Don Nethercott in forum WOODTURNING - GENERALReplies: 11Last Post: 12th September 2006, 10:17 AM -
Vicmarc VM100
By smidsy in forum WOODTURNING - GENERALReplies: 13Last Post: 17th November 2004, 12:32 AM