Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Vicmark jaws on a Bonham chuck
-
26th February 2010, 08:59 PM #1
Vicmark jaws on a Bonham chuck
Hi all
I know this is a topic that has been raised a few times, but I now have the definitive info:
Vermec (Vermec) makes adapter plates that will let you mount Vicmark VM90/100 jaws on a Bonham or Nova scroll chuck. See
http://vermec.tripod.com/PDFs/adaptorplates.pdf
Apparently all the chucks use the same centres for the mounting holes, but the different brands use different sized locating collars between the jaw carriers and the jaws.
Vermec's adapters are $35 per set plus postage.
I have been trying for a while to work out if I could use my VM100 pin jaws on the Bonham 100mm chuck - hopefully by this time next week I will be able to report that the adapter plates work.
cheers, Colin
-
26th February 2010 08:59 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th February 2010, 06:18 AM #2Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Yep. Have used them to put VM Shark jaws on an SN2.
Mounting holes have to be drilled out a mm for that move.Cheers, Ern
Similar Threads
-
Vicmark step jaws
By jefferson in forum WOODTURNING - GENERALReplies: 6Last Post: 1st May 2009, 09:40 AM -
Bonham Chuck thread size
By maxwellavizla in forum WOODTURNING - GENERALReplies: 1Last Post: 1st March 2008, 09:08 AM -
Bonham 130 chuck
By iron bark in forum WOODTURNING - GENERALReplies: 3Last Post: 24th February 2007, 01:07 PM -
Bonham Clone Chuck
By smidsy in forum WOODTURNING - GENERALReplies: 35Last Post: 10th November 2004, 11:24 AM -
Vicmarc or Bonham chuck inserts
By Tristan Croll in forum WOODTURNING - GENERALReplies: 6Last Post: 4th September 2002, 11:22 AM