Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: walnut cylinder 2.0
-
30th May 2020, 01:42 AM #1Member
- Join Date
- Apr 2019
- Location
- germany
- Age
- 36
- Posts
- 57
walnut cylinder 2.0
Hello everybody
Today I show you a cylinder with a large opening on the side
unfortunately the tool has hooked in the end and the whole object is completely torn down,
I was able to bring it back together reasonably well, because the workpiece was too good to throw in the bin
Wood: walnut
54cm
Diameter: 22 cm
Wall thickness: 1-3mm
it was sanded up to 320 grit
Wood turner oil was used for the finish
Hope you enjoy it
YouTube
Best regards
Roger
1 (2).jpg2 (2).jpg3 (2).jpg4 (2).jpg5.jpgWoodturning Walnut Cylinder.jpg
-
30th May 2020 01:42 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
$450-$500 to resleeve this cylinder?
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 16th March 2020, 12:11 AM -
oak cylinder
By xeroxa in forum WOODTURNING - GENERALReplies: 0Last Post: 10th November 2019, 09:42 PM -
Hydraulic Cylinder Fix
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 25th November 2018, 10:40 PM -
Acacia or Asian Walnut or American Walnut Timber Floor
By cgtimber in forum TIMBERReplies: 0Last Post: 13th November 2009, 11:49 AM -
How to hone a cylinder?
By Groggy in forum HAND TOOLS - POWEREDReplies: 10Last Post: 26th January 2006, 03:37 PM