Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Yew hollow form
-
27th October 2013, 03:39 AM #1
Yew hollow form
Not been doing a lot in the way of turning as I am a good 3/4 of the way through making a car rocker. While the paint is drying I am making three tea light stand for dinning table(still need varnishing) again waiting for glue to dry, so I thought that I would turn a piece of yew that I had sitting around with a fault in it.
Below is the end result as stated made from Yew and stands 5" tall 3" across also managed to get wall thickness down between 1/8" to 3/16"
DSCF2388.jpgDSCF2390.jpgDSCF2391.jpg
-
27th October 2013 03:39 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th October 2013, 07:09 AM #2GOLD MEMBER
- Join Date
- Aug 2012
- Location
- Imbil
- Posts
- 1,167
Very nicely done Dalboy did you have much movement while turning with that fault virtually the full length of the piece.
Regards Rod.
-
27th October 2013, 08:55 AM #3SENIOR MEMBER
- Join Date
- Aug 2008
- Location
- Normanhurst NSW 2076
- Age
- 82
- Posts
- 485
Yew vase
Very nice. Love the texture and shape. Drillit.
-
27th October 2013, 09:41 AM #4
Nice piece, I am amazed it held together
Neil____________________________________________Every day presents an opportunity to learn something new
-
27th October 2013, 09:55 AM #5Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Like that!!
I too am surprised that it held together.
-
27th October 2013, 10:09 AM #6
That's got to be 10 out of 10 Derek; the grain/figure are beautiful and the split almost the full length - master classes please!! Cheers, crowie
-
27th October 2013, 10:24 AM #7
Thank you all for the great comments. As I said this really was just a bit of light relief while things were drying.
There was no problem with it flying to pieces the whole piece was quite sturdy. Once I had turned the outside (after picking out any loose bits) I wrapped the thickest part with 1" wide masking tape as well as the neck, leaving the rest not taped.
This made it a lot easier to turn the inside as once I had got to the stage where the walls were getting about 3/8" thick you could see the ghosting of the tool inside. This made it a lot easier to see how thick the walls were.
-
2nd November 2013, 07:15 PM #8
I really like this piece, thank you for sharing.
While waiting for the paint to dry.
-
5th November 2013, 04:00 PM #9Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Enterprising work. Well done.
...
One of the things I learned from for this kind of job is to use non-stretch tape like packing or sellotape.
Maybe that's what you used; masking tape can also just be sticky paper.Cheers, Ern
Similar Threads
-
Second Hollow Form
By toddbron in forum WOODTURNING - GENERALReplies: 5Last Post: 8th November 2011, 07:03 PM -
First Hollow Form
By toddbron in forum WOODTURNING - GENERALReplies: 12Last Post: 26th September 2011, 05:34 PM -
hollow form
By smiife in forum WOODTURNING - GENERALReplies: 10Last Post: 12th September 2011, 08:31 PM -
New Hollow Form
By GeorgeK in forum WOODTURNING - GENERALReplies: 9Last Post: 22nd May 2007, 11:35 AM -
Hollow Form
By Gil Jones in forum WOODTURNING - GENERALReplies: 15Last Post: 21st September 2006, 04:07 PM