Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
20th February 2011, 01:40 PM #1
Some YouTube videos for woodturners
Our forum member and very talented professional woodturner Brendan Stemp has posted three interesting vidoes on YouTube. I found the one on finishing to be very helpful. Check it out at [ame="http://www.youtube.com/watch?v=Rj7QJkdycnE"]YouTube - Wood Turning Lacquering and Finishing[/ame] or just do a YouTube search on Brendan Stemp.
The other two are on Sandpaper and Chattertools.
Well done BrendanRussell (aka Mulgabill)
"It is as it is"
-
20th February 2011 01:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th February 2011, 01:52 PM #2
Interesting, thanks for sharing.
Reality is no background music.
Cheers John
-
20th February 2011, 09:44 PM #3
Russel one thing to consider when spraying is to have a regulator and gauge at the gun.
What this does is allows you to have full pressure in your line right up to the gun then regulate it to the pressure required. It makes it easier to see what pressure you are using.
The other reason for this is that if you have a long hose the pressure showing at the compressor could be anywhere from 5-10psi lower at the gun.
They can be very compact and dont add too much weight to the gun.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
20th February 2011, 11:36 PM #4
Thanks Jim!
I have taken your suggestions on-board along with Brendan's. One of these days soon I'll get it all togetherRussell (aka Mulgabill)
"It is as it is"
-
21st February 2011, 08:38 PM #5
Brendon
Hmm
tell us to wear safety equipment
then you don't
BTW like the tuteregards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
22nd February 2011, 12:02 AM #6
You are right on that one but can you imagine how difficult it would've been to hear me talk if I had a mask on. That was the reason for the omission and I did make mention of this fact but it was cut in the editing process (not by me) for reasons I can't remember.
-
22nd February 2011, 08:12 AM #7
Thought that might have been the case but thought I'd be a cheekie bugger anyway
BTW where did you get the gun?regards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
22nd February 2011, 01:01 PM #8
Good presentation, Brendan. Thanks.
Cheers,
Ed
Do something that is stupid and fun today, then run like hell !!!
Similar Threads
-
fine woodworking videos youtube
By jow104 in forum WOODWORK - GENERALReplies: 0Last Post: 17th February 2010, 07:15 PM -
Couple of pen turning videos on Youtube
By Big Shed in forum WOODTURNING - PEN TURNINGReplies: 1Last Post: 4th January 2010, 05:02 PM -
Youtube?
By WillyInBris in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 2Last Post: 20th May 2009, 07:48 PM