Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Attaching a trim piece
-
18th November 2007, 12:21 AM #1
Novice
- Join Date
- Feb 2006
- Location
- ACT
- Posts
- 13
Attaching a trim piece
In the pic, I am fitting the trim around the oven. I'd appreciate some assistance with fastening the top marked A and middle B. Down the bottom is OK
It needs to be removable to service the oven. All I could think of is setting in magnets in the trim piece at A and B (maybe another one or two?) and fitting screws into the casing behind it.
Any other tricks?
-
18th November 2007 12:21 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th November 2007, 01:30 PM #2
SENIOR MEMBER
- Join Date
- Aug 2005
- Location
- kiama
- Posts
- 626
How about a picture of it with the trim removed so we can see what there is to fix to - if anything
-
18th November 2007, 01:35 PM #3
GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Brisbane
- Posts
- 4,975
You could fit some magnetic push-open push-close type closers.
Cheers
Michael
-
18th November 2007, 09:15 PM #4
Hoarder of Timber
- Join Date
- Jun 2006
- Location
- East Warburton, Vic
- Age
- 54
- Posts
- 14,189
Are you sure it needs to be removed to service the oven, as just about every oven I have installed including Omega from my Kitchen installation days fit straight in with the trim fitted first.
Cheers
DJ
ADMIN
-
19th November 2007, 07:48 AM #5
Concepteur
- Join Date
- Dec 2005
- Location
- Brisbania
- Posts
- 162
My thoughts exactly - I haven't met a late model oven yet that needs to have the fascia removed to take the oven out...the only reason we fit the ovens first is so that we can get the fascia boards nice and close to the oven.
Originally Posted by DJ's Timber
If this is also the case with your oven (Omega?) then construction adhesive is your friend.
As an aside, have you thought about taking 2-3mm off the top of that board to make it level with the adjoining door?
Cheers,
-
24th February 2008, 02:19 PM #6
Novice
- Join Date
- Feb 2006
- Location
- ACT
- Posts
- 13
Update. I did not really need to be removeable as the oven could be slide out without removing the trim piece. I did however use a couple of heavy duty magnetic door closers and a few 10mm disc shaped rare earth magnetics and it sits in there perfectly.
Thanks all for the advice.
Similar Threads
-
Problem Piece
By Jackson in forum WOODTURNING - GENERALReplies: 17Last Post: 30th November 2006, 02:36 PM -
'Nother Piece of Ash
By Sir Chiz in forum WOODWORK PICSReplies: 1Last Post: 7th May 2003, 05:32 PM
