Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
16th November 2009, 12:00 PM #1
Installing acrylic / fibreglass bath
Have pulled out old cast iron bath and are currently installing a new one of same size but its an acrylic / fibreglass one. I have a couple of querries about the installation of these:
1. Where it is rebated into the stud wall, is this adequate support for that side of the bath (ie: stud every 450mm along the length of bath) or do they have to have support right along the side, which would require a batten built into the stud wall??
2. For the sand & cement mix under the tub, does this need an adetive such as bondcrete so the tub actually sticks to the mortar?
I have read the installation instructions but they have conflicting info and prefer hearing from peoples experience on installations.
Cheers
Read the full thread at RenovateForum.com...
-
16th November 2009 12:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
what goes over fibreglass
By la Huerta in forum BOAT BUILDING / REPAIRINGReplies: 12Last Post: 28th August 2005, 02:50 AM