Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Temporary benchtop
-
27th December 2006, 06:23 PM #1
Temporary benchtop
Got a quote for Caesar Stone benchtops = 5800. Can't afford just yet so I knocked up a temp one out of 32mm thick HMR particle board. It'll have twin Smeg underbench mount sinks. I'm going to put a couple of coats of MArine Spar Varnish around the inside edges of the cutout to prevent swelling when wet hopefully.
I've edged it in Masara 32mm x 19mm ripped down from a piece of decking that was too distorted to use on the deck. It's had 2 coats of sanding sealer and i'll finish it with a couple of gloss coats of something or other.
Like I say just temp.If you never made a mistake, you never made anything!
-
27th December 2006 06:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th December 2006, 10:29 PM #2
Geez Sheddie,
have you been kicked outa the house. Fridge, microwave and computer in the garage/shed
Les
Ps. I have also resorted to MDF temporary tops but not as flash as yours. Should not be too long for my permanent tops to be ordered.
-
28th December 2006, 12:26 AM #3If you never made a mistake, you never made anything!