Page 1 of 2 12 LastLast
Results 1 to 15 of 27
  1. #1
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,470

    Default Venting into the roof cavity.

    Have been renovating a 1950's brick and tile home and would like to put an exhaust fan in the bathroom to get rid of steam and one in the kitchen to deal with the cook top.
    Is it acceptable to vent these straight into the roof cavity?, the roof has a decent pitch and there is a fair bit of space up there. Also being tiles is it a rather free breathing space. Any thoughts appreciated.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    74
    Posts
    3,372

    Default

    Kitchens MUST be vented externally either through the eave /external wall or through the roof with a non combustible duct (metal), bathrooms not a problem.
    The person who never made a mistake never made anything

    Cheers
    Ray

  4. #3
    Join Date
    Dec 2011
    Location
    Brisbane
    Age
    43
    Posts
    98

    Default

    Edit,

    It's ok to vent bathrooms to roof cavity in Queensland but I've always thought it dodgy, my personal preference is to vent all your humidity outside.

  5. #4
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Poster artful bodger
    Location "Tasmania"

    Venting the bathroom steam into the roof cavity sounds like a quick way to create rain in the roof space -- you might even get snow and ice in winter.
    nuff said??
    regards from Alberta, Canada

    ian

  6. #5
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,470

    Default

    Quote Originally Posted by rwbuild View Post
    Kitchens MUST be vented externally either through the eave /external wall or through the roof with a non combustible duct (metal), bathrooms not a problem.
    I was afraid someone might say this (about kitchens) as I reckon there is a good chance the eaves have asbestos in them and I'm not sure about how to go through tiles. I have seen plenty of similar aged houses that have a simple fan in the ceiling over the cook tops/oven that do vent into the roofspace but guess they were put in like that decades ago and standards/rules have changed.

  7. #6
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,470

    Default

    Quote Originally Posted by ian View Post
    Poster artful bodger
    Location "Tasmania"

    Venting the bathroom steam into the roof cavity sounds like a quick way to create rain in the roof space -- you might even get snow and ice in winter.
    nuff said??
    I have noticed with corrugated iron roofing here that on really frosty nights water forms and ices up on the underside of the roofing anyway, even without an extraction fan from the bathroom. Have not seen this with tiled roofs but have not been watching.

  8. #7
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    Venting to the roof space was common practice in that era, particularly as there was no sarking so the roof space breathed. Is is not an ideal solution though
    Modern roofsoaces are sealed and they are always vented externally

  9. #8
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    74
    Posts
    3,372

    Default

    If anyone has been in a roof where a non ducted kitchen exhaust fan is located will know about the build up of grease in that general area and how many times does anyone clean the range hood filters, come on, be honest.
    Vented bathrooms into roof spaces is not a particularly detrimental but the number of 2 storey or flat roofed houses with vented bathrooms into ground floor ceiling spaces is a recipe for long term problems, humid moist air in a non vented cavity is a NO NO. You should see what it does to plasterboard and flooring..... Temperate climates and above is ok for ducted bathrooms into roof area but NEVER in sub alpine or alpine regions, they must be ducted. Also remember that in bush fire zones any external ducting MUST have approved metal screening to prevent ember attack entering the structure.
    The person who never made a mistake never made anything

    Cheers
    Ray

  10. #9
    Join Date
    Mar 2003
    Location
    Newcastle
    Age
    69
    Posts
    1,071

    Default

    The kitchen has to be vented outside because of fire risk. You don't want your kitchen exhaust blowing flames into the roof space if oil etc. catches fire. Basically the metal tube goes straight up and one tile is removed and replaced with a piece of flashing with a hole for the exhaust in the middle of it. Not too difficult but I'm glad it's not me doing it.

  11. #10
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    74
    Posts
    3,372

    Default

    1950 house = brittle Marseille pattern terracotta tiles, very flimsy 40 x 20 brittle oregon tile battens with rusted nails and probably 25 to 27 degree pitch. Unless you are very agile, suggest you get a plumber to do it. You probably won't have any spare tiles around the house but if some break or crack you can get matching ones from any of the restoration period second hand yards
    The person who never made a mistake never made anything

    Cheers
    Ray

  12. #11
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    also with a 1950s house.
    any largish flat surface = probable asbestos
    regards from Alberta, Canada

    ian

  13. #12
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    Quote Originally Posted by artful bodger View Post
    I have noticed with corrugated iron roofing here that on really frosty nights water forms and ices up on the underside of the roofing anyway, even without an extraction fan from the bathroom. Have not seen this with tiled roofs but have not been watching.
    extractor fan = a lot more moisture than what is in the atmosphere itself.
    on a cold morning the air in the roof space is probably saturated (because of the low temps) adding steam from a shower implies rain in the roof.

    30 years ago sister and brother in-law had mildew running down the wall adjacent to a ceiling vent -- don't recall if the roof was iron or tile. This was in Bathurst.
    regards from Alberta, Canada

    ian

  14. #13
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,470

    Default

    Is it generally considered the job of a plumber or electrician, or both to install exhaust vents?.

  15. #14
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    74
    Posts
    3,372

    Default

    Both
    The person who never made a mistake never made anything

    Cheers
    Ray

  16. #15
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    Quote Originally Posted by artful bodger View Post
    Is it generally considered the job of a plumber or electrician, or both to install exhaust vents?.
    If there is some tricky flashing work to do then a plumber may need to be involved but first port of call is an electrician as it will need wiring up and see how you go from there if a plumber is needed

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 3
    Last Post: 24th July 2015, 07:49 PM
  2. venting dc
    By wayne 673 in forum DUST EXTRACTION
    Replies: 5
    Last Post: 13th April 2011, 04:12 PM
  3. brown powerpoints in roof cavity?
    By Reno RSS Feed in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 23rd June 2009, 08:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •