Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2004
    Location
    Mount Hutton N.S.W
    Age
    59
    Posts
    632

    Default Expansion joint material missing

    Hi all
    Wife pointed out that where the black expansion stuff is between house brick and cement walkway
    A lot has gone missing
    Should I replace it or
    Could I use this as a replacement

    selleys brick and concrete sealant - Google Search

    Thanks
    Greg

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    Considering that expansion joint foam - correctly installed - is laid in place and then the concrete poured/bricks laid, good luck in trying to retrofit it if using the same size! If you can, then the stuff was probably installed sloppily in the first place.

    As it's between path and wall, it's fair to say that it's only there for expansion purposes and to stop dirt (& weeds) occupying the space. Not for water-proofing... and nor should it be, although some cowboys...

    You can buy the foam in 1cm sq strips which'd be easy enough to slip into the gap... but it'd probably lift back out just as easily. I see no point in 'gluing it in' with a silicon.

    The silicon product you linked would probably last longer, if installed correctly. ie. thoroughly clean out the gap and remove any excess dirt, etc. so it has clean surfaces to bond to. I wouldn't go to the extreme of using a pressure cleaner, as that can be too effective and actually start removing foundation materials. I'd use a bucket of water and an old paint brush for most cleaning, then a garden hose on an 'easy' pressure; just enough to provide a flow of water to flush out the debris.

    Most importantly, ensure everything is properly dried before applying the silicon. ie. best done in a warm, dry period of weather.

    Personally, I suspect that there are other silicons/caulks that would do the job just as well and also be cheaper. (But then again, I'm a tad paranoid and suspect that for many silicon products the only real difference is the label on the tube and the corresponding price tag. )
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  4. #3
    Join Date
    Nov 2004
    Location
    Mount Hutton N.S.W
    Age
    59
    Posts
    632

    Default

    Thanks skew for that reply It explained the solutions brilliantly 👌
    I will plan this for a spring weather job by the sounds of it
    Wife likes the idea of foam strips over silicone 😱
    But she may change her mind by the time spring comes around 😇

  5. #4
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    There is no real need to do anything apart from for visual reasons.
    If you do want to call it put foam backing rod in the gap approximately 10 mm below the surface and the preferred product as a filler is polyurethane (sika type) but you can also use silicone if you prefer

    If you are happy with the way it looks now just leave it

  6. #5
    Join Date
    Nov 2004
    Location
    Mount Hutton N.S.W
    Age
    59
    Posts
    632

    Default

    Thanks beardy
    The wife likes the idea of filing hole with foam backing and topping it with filler
    Her house has to look nice 😉

Similar Threads

  1. Construction joint or expansion joint?
    By ubeaut in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etc
    Replies: 0
    Last Post: 16th November 2008, 07:18 AM
  2. Ceramic tiling over expansion joint
    By SkyHook in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 2
    Last Post: 11th March 2008, 09:06 PM
  3. sandstone paving - expansion joint
    By gsouth in forum PAVING
    Replies: 11
    Last Post: 27th February 2007, 08:23 AM
  4. When do you need an expansion joint in brickwork?
    By juliussee in forum BRICKWORK
    Replies: 9
    Last Post: 1st September 2005, 06:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •