Results 1 to 11 of 11
  1. #1
    Join Date
    Jan 2010
    Location
    melbourne
    Posts
    8

    Default Surface recommendations wanted for gravel driveway

    I have a short driveway (20mtrs) behind my carport to service 2 x storage bays for cars. The cars are rarely used and lightweight, all under 1000 k - its mainly foot traffic. I have put down a 140mm layer of compacted road base and brown crushed rock onto a porous base mat. Soil is sandy (Mornington Peninsula). For aesthetics and that crunchy driveway ambience I was going to top with gravel. Any suggestions on size that will best hide wheel tracks. Also, suggestions on whether I should try and compact the gravel??

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2018
    Location
    Melbourne
    Posts
    940

    Default

    Something with binder material in it, similar to Lilydale topping may suit provided not on a slope.
    Check your local suppliers and see what's available.

  4. #3
    Join Date
    Jun 2003
    Location
    Sunbury, Vic
    Age
    84
    Posts
    2,713

    Default

    I have used Tuscan Toppings (13mm size) which settled nicely with the car running over it. It was suggested to me to throw a light dusting of cement over it and water in. I did not bother but it could be worth thinking about. The only downside, very small, is that wet tyres tend to pick up the finer particles and carry them onto the carport concrete floor which I then sweep or blow back out later.
    Tom

    "It's good enough" is low aim

  5. #4
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    Unless it is bound with fines like a shale or roadbase mix any aggregate you use will get pushed around by your vehicle and develop wheel ruts
    Not a big deal to rake over to tidy it up every now and then. If you have a lot of leaves etc about a heavier 20mm aggregate is easier to use a leaf blower on to tidy up if that is an issue for you

  6. #5
    Join Date
    Aug 2021
    Location
    Mornington Peninsula Australia
    Age
    63
    Posts
    15

    Default

    Im mornington peninsula too. And facing same thing. Im going with permeable gridding with 7-10mm pebble contained. Example is pebblelock through bunnings. Surepave by same maker cirtex. Or diamond grid. Sustainable. Permeable. Keeps water on site. And no sand into the garage/workshop. Have a look at them.
    Peter

  7. #6
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    14,138

    Default

    I use 14/10 blue steel on top of a well compacted base. I drive trucks over it. I find 20mm is too big for foot traffic, tends to roll too much underfoot
    Cheers

    DJ


    ADMIN

  8. #7
    Join Date
    Jan 2010
    Location
    melbourne
    Posts
    8

    Default

    Tks for suggestion, did look at this but for my application was cost prohibitive.

  9. #8
    Join Date
    Jan 2010
    Location
    melbourne
    Posts
    8

    Default

    Tks, my thoughts confirmed about the 20mm and foot traffic. No problem with pebbles getting stuck in boot or tyre tread though!

  10. #9
    Join Date
    Jan 2010
    Location
    melbourne
    Posts
    8

    Default

    Thanks to all for sensible and useful commentary.

  11. #10
    Join Date
    Jun 2006
    Location
    East Warburton, Vic
    Age
    54
    Posts
    14,138

    Default

    Quote Originally Posted by mn1 View Post
    No problem with pebbles getting stuck in boot or tyre tread though!
    Not really, get the occasional one in my boots and threads on my vehicles are fairly open so don’t really get much stuck in them
    Cheers

    DJ


    ADMIN

  12. #11
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,095

    Default

    mn1

    I would suggest 10mm material, but make sure the aggregate is "angular". We have three types here. The round river gravel moves all over the place just with foot traffic. It was the most expensive too. The best and cheapest was the sharp, angular gravel as it beds in well (road base would fall into this category.)

    Regards
    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

Similar Threads

  1. gravel driveway
    By Reno RSS Feed in forum GENERAL ODDS N SODS
    Replies: 0
    Last Post: 24th January 2013, 05:10 PM
  2. Gravel driveway with gardens
    By BustedThumbs in forum LANDSCAPING, GARDENING, OUTDOORS
    Replies: 4
    Last Post: 10th January 2008, 04:54 PM
  3. Filling holes in a gravel driveway
    By Matt88s in forum BRICKWORK, CONCRETING, PAVING, RENDERING, etc
    Replies: 9
    Last Post: 5th July 2007, 06:48 PM
  4. Sandstone gravel driveway
    By BustedThumbs in forum LANDSCAPING, GARDENING, OUTDOORS
    Replies: 5
    Last Post: 18th December 2006, 10:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •