Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 8 of 8
  1. #1
    Join Date
    Feb 2005
    Location
    Sydney
    Posts
    67

    Default Using a Demo Hammer as a Compactor

    This could possibly be the silliest question ever asked on this forum but anyway, I'll give it a shot .....

    Got a bit of paving to do and I also own an el cheapo demo hammer. Would there be any way I could use the hammer as a compactor, rather than going out to hire one? The thought never crossed my mind, but I was watching a couple of blokes driving some pile formwork into a river bed, using a jackhammer onto a plate over the cylindrical formwork. Could I use the demo hammer over a square of plywood/metal/whatever those blokes were using in place of a compactor?

    Feel free to laugh out loud

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2003
    Location
    Conder, ACT
    Age
    77
    Posts
    6,051

    Default

    Why not ????????
    Cut the point of a drill bit and weld a plate on.

    I am looking for an old drill bit to cut off and make into a steel post driver.

  4. #3
    Join Date
    Aug 2003
    Location
    .
    Posts
    10,482

    Default

    People use this very same method when constructing rammed earth houses.

    Al

  5. #4
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    52
    Posts
    1,989

    Default

    I think you would have a pretty sore back after using a demo hammer to compact any resonable area of paving, I know mine aches just after digging out a basic hole using mine. As an ex-landscaper I would recommend hiring one, they are not that expensive and you will get a much better finish on your paving. Many hire shops do half day hire. If it a very samll area or a patch you are best using a decent lump of steel on a pole as a hand stamper. Remember that when using clay or smaller cement paving you will get the best result by spreading jointing sand over the paving after it is layed before running the compactor over it again with a piece of carpet under it's plate.

  6. #5
    Join Date
    Mar 2007
    Location
    Adelaide South Australia
    Posts
    544

    Default paving

    I agree with burnsy, anything over 3sqm hire the right tools for the job.
    Don't force it, use a bigger hammer.

    Timber is what you use. Wood is what you burn.

  7. #6
    Join Date
    Feb 2005
    Location
    Sydney
    Posts
    67

    Default

    Thanks for the replies everyone.

    I have 5 small areas to pave, each about 2.5 sqm with a concrete step in between each. I used a hand tamper for the first area, but will give the demo hammer a go. Just want to avoid doing 5 half day hires

    Cheers

  8. #7
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    52
    Posts
    1,989

    Default

    Unless you are building the steps as you go so need one lot of paving done before you can finish the step to set the next level, compact them all at the same time. As long as no-one is running around on them or digging them up they will stay compacted, especially if you have some clay content in your paving sand. If you can't do this I still rekon the hand tamper is the way to go, big lump of sleeper on a broom handle works well. keep us informed if you use the Demo hammer, I would like to know the outcome.

  9. #8
    Join Date
    Feb 2005
    Location
    Sydney
    Posts
    67

    Default

    Gave it a go yesterday and it seemed to work ok. Still experimenting at this stage but tried it using a piece of board with some plate screwed to it to stop the bit going through. Way easier and quicker than the hand tamper, but can see what you're saying with a sore back doing larger areas.
    Don't think it did wonders for the bit either

Similar Threads

  1. Drill, Hammer, Rotary: Review - Ozito 900w (Author - Groggy)
    By Groggy in forum HAND TOOLS - POWERED
    Replies: 18
    Last Post: 15th December 2009, 10:15 PM
  2. Hammer assessory question for Brendan
    By ian in forum HAND TOOLS - POWERED
    Replies: 3
    Last Post: 6th March 2007, 09:51 AM
  3. Hammer handles
    By Andy Mac in forum HOMEMADE TOOLS AND JIGS ETC.
    Replies: 31
    Last Post: 31st October 2005, 09:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •