Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Reticulation problem
-
15th March 2008, 09:58 AM #1
Novice
- Join Date
- Aug 2006
- Location
- Mandurah
- Posts
- 12
Reticulation problem
I have mains feed reticulation of 8 stations with a Rain Dial controller. Although the controller is working and I can here solenoids buzzing and clunks from the piping from presumably the valves no water is coming out of the sprinklers. The system was working perfectly until last week and I can see no signs of leakage anywhere. What could be the problem please? Thanks Biko
-
15th March 2008 09:58 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th March 2008, 10:59 AM #2
SENIOR MEMBER
- Join Date
- Jan 2003
- Location
- Perth,Western Australia.
- Posts
- 616
Do you have a master solenoid at the point where the main feeds from. Check to make sure this is still working.
Macca
-
15th March 2008, 07:11 PM #3
Landscaper
- Join Date
- May 2007
- Location
- Bundoora, Melbourne
- Posts
- 200
Check the wiring too, sometimes the connection can slightly come apart hence the buzzing noise or no solenoids engaging at all. The system going on and off is the wiring going in and out of connection hence the buzzing and the shaking pipes.
I use the gel connections for wiring, they keep it firmer together and much easier to put together.
Similar Threads
-
A little eye problem
By Barry Hicks in forum WOODIES JOKESReplies: 0Last Post: 12th September 2007, 04:10 PM
