Results 1 to 9 of 9
  1. #1
    Join Date
    Apr 2003
    Location
    Sydney
    Posts
    14

    Default Securing artificial grass to treated pine

    I am installing an artificial grass path up a slope in my garden. It has timber edging - H4 treated pine 75x45 (with the same for cross support) and filed and compacted with blue metal dust (60mm).
    I am now about to secure the grass and want to screw it down to the timber. I was thinking of using 25mm gal button head screws.
    Good idea? Bad idea? Stainless timber screws? Stitching screws (not too sure what they are)? Tufcote treated pine screws? Appreciate any advice other than starting again!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2019
    Location
    NSW
    Age
    37
    Posts
    1,126

    Default

    would staples hold it and be hidden better?

  4. #3
    Join Date
    Apr 2003
    Location
    Sydney
    Posts
    14

    Default

    Thanks for your reply.
    Not too sure that staples would be strong enough - it is pretty thick material.

  5. #4
    Join Date
    Dec 2013
    Location
    San Antonio, Texas, USA
    Posts
    3,070

    Default

    Urethane flooring adhesive is plenty tough and dries flexible.
    Innovations are those useful things that, by dint of chance, manage to survive the stupidity and destructive tendencies inherent in human nature.

  6. #5
    Join Date
    Apr 2003
    Location
    Sydney
    Posts
    14

    Default

    Thanks for the reply
    I think I need to tension it so I doubt that the adhesive would initially hold it in place.

    Any views on the type of screw from anyone?

  7. #6
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    A panhead screw should do the job. You could add some adhesive if you feel it needs it

  8. #7
    Join Date
    Apr 2003
    Location
    Sydney
    Posts
    14

    Default

    Thanks
    Gal? Stainless? Tufcote?

  9. #8
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    Stainless or tuffcote would be fine . If you can’t find a big enough head in a suitable screw grade you could place a small washer under the screw to give a bit more surface area to the grass

  10. #9
    Join Date
    Apr 2003
    Location
    Sydney
    Posts
    14

    Default

    Thanks Beardy - very much appreciated.

Similar Threads

  1. Artificial grass for pre-school
    By Neo in forum GENERAL ODDS N SODS
    Replies: 2
    Last Post: 10th May 2004, 05:36 PM
  2. Treated Pine Uses
    By abungate in forum TIMBER
    Replies: 2
    Last Post: 7th March 2002, 06:38 PM
  3. Treated Pine
    By Sir Stinkalot in forum TIMBER
    Replies: 2
    Last Post: 16th November 2001, 01:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •