Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Scribing whacky door
-
3rd July 2007, 08:02 PM #1
Scribing whacky door
Got a door in a restumped house that refuses to close. The restumping has altered the jamb so that it tapers as you move up, in other words, it is about 6 mm thinner at the top than it is at the bottom. It's binding on the hinge side as well as the lock side. Is there a way of scribing the door so that you can mark exactly how much needs to be planed so that you don't have to endlessly take the door down, plane and re-test the door or just resign myself to a patient and time-consuming task?
-
3rd July 2007 08:02 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
3rd July 2007, 10:21 PM #2Awaiting Email Confirmation
- Join Date
- Jan 2007
- Location
- Goulburn NSW
- Age
- 89
- Posts
- 913
take the furniture off the closing side of door, pack the hinges that are causing the door to bind. Check that the top of door has right clearance. get a helper to close the door while you mark the door to fit the jamb. clearance needed use half a butt or thin straight edge. refit furniture.
-
5th July 2007, 12:06 AM #3
Thanks, Les, I'll give it a try.