Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
8th April 2014, 06:00 PM #1
Most Valued Member
- Join Date
- Nov 2008
- Location
- Victoria Australia
- Posts
- 5,897
Is a solid core door really solid?
I am replacing an exterior door sized 2040 x 680 x 35. Just bought a Hume Duracote STPC door 2040 x 815 x 35 and described as solid core in Bunnies catalogue. The wooden edges on both vertical sides are 35mm square. I will need to reduce the width by 135mm.Can anyone tell me what I will find as an edge if I take 135mm off the width? Is it better to take it all off one side? Or 67mm off each side? mick
Read and reply to the full thread at RenovateForum.com....
-
8th April 2014 06:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Kat's Solid Door Version Work Bench WIP
By Geekgirl in forum THE WORK BENCHReplies: 94Last Post: 1st September 2012, 11:19 AM -
Solid-Core Door Workbench - WIP
By Hermit in forum THE WORK BENCHReplies: 97Last Post: 5th August 2012, 11:11 PM -
Best way to flatten solid core door workbench?
By joez in forum WOODWORK - GENERALReplies: 9Last Post: 27th May 2010, 05:08 PM -
Solid core doors for kitchen benchtop
By aldemaar in forum WOODWORK - GENERALReplies: 9Last Post: 16th October 2008, 09:52 PM -
Glass panel into solid timber door
By rumplestiltskin in forum WOODWORK - GENERALReplies: 0Last Post: 9th April 2008, 11:45 PM
