Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
Thread: timber venetians
-
25th June 2006, 09:09 AM #16
Try Hard
- Join Date
- Nov 2005
- Location
- wyndham vale
- Age
- 48
- Posts
- 16
I have cut down all our venetions with a GMC 210mm drop saw, but i fitted it with an irwin thin kerf 40t blade and it was easy and produced better ends than were on them to start with. I have cut 22 blinds and not had a problem most were cedar and some were the white plastic type. Saved a heap doing this in one room saved $700 so i bought a new saw!
Held them by hand against the fence up against a clamped end stop. Mounted blind on F clamps from the garage door opener to remove and refit slats. Saw also cut plastic top rail and timber bottom.
-
25th June 2006 09:09 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th June 2006, 04:21 PM #17
New Member
- Join Date
- Jan 2006
- Location
- Sydney
- Posts
- 3
Really not worth the trouble imo . I recently bought timber venetians for 3 front windows ,big glass area - 2 are 2300mm wide and 1 is 3700mm wide (avg 2m drop ea). The lot cost just on $1000 . This was nice grade western red cedar .Includes brackets pelmets screws etc .
Similar Threads
-
Deceptive timber
By Suresh in forum HAVE YOUR SAYReplies: 1Last Post: 17th September 2005, 12:42 AM -
Timber Sample Collection
By echnidna in forum WOODWORK - GENERALReplies: 0Last Post: 16th December 2004, 11:52 AM -
Any one in Melbourne intersted in getting some Tassie timber sent over?
By ozwinner in forum TIMBERReplies: 29Last Post: 28th June 2004, 02:41 PM -
What timber can I use ?
By Arron in forum TIMBERReplies: 5Last Post: 12th June 2003, 09:00 AM -
Timber barter for shed or timber covering offered
By Wild Dingo in forum ANNOUNCEMENTSReplies: 1Last Post: 21st May 2003, 04:49 AM
