Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 8 of 8
  1. #1
    Join Date
    Jan 2008
    Location
    NSW
    Posts
    19

    Default Water entering under my back door - how to seal?

    Hi all
    My back door is getting a bucketload of water coming under it in the rain. Water hits the door, runs down it and then hits the floorboards which extend out beyond the external door face, and water runs straight under the door !

    I just bought a cheapo awning/canopy to install over the top to try and stop this, LINK but figure I should also try and seal under the door somehow aswell? Is that needed or should the awning block the water (it is a 1m protrusion). The direction is southerly so it does get a lot of wind+rain from that way.

    Obv it will be a slight trip hazard but there's a big step there to outside anyway and would rather that than water puddles on my kitchen floor.

    The current gap under the door is 5mm one side, 10mm another side. Door is 810mm. Should I be buying something like a raven RP112 ? Although they seem to cost $100+ The trouble is the floorboards extend 130mm beyond the door face externally, so need something long enough to not allow water to drop beyond the door sill and go underneath it?

    I am not a very handy person so the easier option the better.

    Photos here to show what I mean:

    IMG_0567.jpg

    IMG_0568.jpg

    IMG_0572.jpg

    thank you for your help!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2014
    Location
    Little River
    Age
    77
    Posts
    1,205

    Default

    You need something like this. The grooves between the floor boards will need to be filled where the seal hits the floor.

  4. #3
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    The real problem is the lack of a sill... and possibly lack of a drip line cut into the bottom of the door. However, looking at the pix, retrofitting a sill wouldn't be a simple matter.

    Bohdan's solution will reduce the amount of water entering, but it won't fix it.

    Couple one o' those seals with an awning you'll probably be able to live with it, but the bad news is that spot will always be a problem and prone to leakage.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  5. #4
    Join Date
    Nov 2006
    Location
    Melbourne
    Age
    64
    Posts
    848

    Default

    if you're handy, you could change the door to externally hung (ie outward opening). But that opens up a whole new set of possible problems.
    TM

  6. #5
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    The odds are against you with the floor running through to the exterior
    You could get a metal flashing folded up to cover the external flooring with a small upturn under the door or there are a number of Raven seals available at the Green shed that will keep the majority of the water out , one being a hinged flap type fixed to the outside with a cam on the jamb or there is one that has a drop down seal triggered by the side of the door jamb or for a more concealed look yes u can insert a flap seal in the bottom rail and put a weatherbar on the floor for it to seal up to

  7. #6
    Join Date
    Jun 2010
    Location
    Wimmera
    Posts
    174

    Default

    Time to build a porch.

    Hooroo.

  8. #7
    Join Date
    Apr 2016
    Location
    Mooroopna, Victoria, Australia
    Age
    33
    Posts
    228

    Default

    As mentioned above, you need a sill. Or large undercover area. Either way, not a small/quick fix.
    I cut it twice and it's still to short.

  9. #8
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    74
    Posts
    3,372

    Default

    The first part of Beardy's reply is the correct solution. You can get checker plate aluminum, fold down thickness of flooring + 10mm, horizontal back under door and turn up 10mm (you will need to trim bottom of door 5mm clear of this upturn) run a saw between the bottom of each jamb stile to allow for this to slide under. Use Sikaflex Pro to fix tread plate to floor, allow 24hrs to cure and seal all junctions of the aluminum to the jamb stiles etc. Also use Sikaflex to seal the bottom of the door after you have trimmed it to suit. To avoid a trip hazard, fit a carpet edge trim over the upstand at the door then fit Raven RP303 to external face of doop
    The person who never made a mistake never made anything

    Cheers
    Ray

Similar Threads

  1. how do i seal an external wooden and security door to stop bugs getting through?
    By Reno RSS Feed in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 0
    Last Post: 19th November 2009, 12:40 AM
  2. Replies: 17
    Last Post: 2nd April 2009, 11:57 PM
  3. how do you seal a wet storm water system?
    By ubeaut in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etc
    Replies: 0
    Last Post: 16th November 2008, 07:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •