Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Box design parameters ?
-
15th May 2006, 06:14 PM #1
Box design parameters ?
Are there are design recommendations when constructing ornamental boxes and jewellry boxes ?
I would think there was something to ensure the finished design was asthetically pleasing.
I was think of parameters for wall thickness v height v width v depth
One internet site quoted :
Less than 16" perimeter, use 5/16" thick stock
From 16" to 30" perimeter, use 3/8" thick stock
From 30" to 50" perimeter, use 1/2" thick stock
Over 50" perimeter up to 'full size furniture', use 5/8" thick stock
I can't find much on the net about it and don't have any suitable books to hand.
Thanks
Tony
-
15th May 2006 06:14 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
15th May 2006, 07:33 PM #2
Hi Tony,
Have a look at this thread http://www.woodworkforums.ubeaut.com...ighlight=ratio which offers a few opinions, as well as recommended reading.Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
15th May 2006, 08:52 PM #3
ahhh, excellent link(s)
i did a google search but not a ubeaut search DOH !
thanks chris, just what i was after !
tony
Similar Threads
-
Our first attempt at a box - a cutlery box
By dan_tom in forum WOODWORK PICSReplies: 19Last Post: 20th October 2005, 10:48 AM -
Design for simple wooden latch for jewellery box
By Samson13 in forum DESIGNS & PLANS FOR PROJECTSReplies: 0Last Post: 7th June 2005, 06:09 PM -
what hand plane to choose?
By EMistral in forum WOODWORK - GENERALReplies: 19Last Post: 19th February 2005, 08:29 AM -
Modern design vs reproduction
By Driver in forum WOODWORK - GENERALReplies: 10Last Post: 2nd June 2003, 07:02 PM -
vac box for template routing
By soundman in forum ROUTING FORUMReplies: 4Last Post: 27th July 2002, 11:56 PM