Needs Pictures: 0
Results 1 to 14 of 14
Thread: Box with drawers
-
6th March 2017, 09:16 AM #1
Box with drawers
Here area couple of designs I have been trying out. I actually used SketchUp first to clarify the concept and get some drawings that helped in the thinking process.
The first box is made with quilted maple veneer on a 9mm marine ply substrate.The Asian style stand and drawer ends are New Guinea Rosewood and the drawers are lined with a red pigskin suede.
The second box is a slightly different concept that reveals a full length tray when the drawers are opened. This box is made from a solid Fiji hardwood and the drawer ends are a eucalyptus burl. This style lends itself to include a removeable half length/half depth tray with partitions for small items.
The boxes are about 450mm long x 160 mm wide.
side2.JPGhalfopen.JPGopen2.JPGendopen.JPGbox2 sideadjust.JPGbox2end.JPGbox2open.JPGAnd my head I'd be a scratchin'
While my thoughts were busy hatchin'
If I only had a brain.
-
6th March 2017 09:16 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th March 2017, 10:16 AM #2
I really like that design. It's an excellent centre piece for a display.
The quilted maple is marvellous. May I ask where you obtained it from?
-
6th March 2017, 10:43 AM #3
stunning
-
6th March 2017, 11:12 AM #4GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,039
It's always nice to see some different ideas. Congrats on developing the style, very nice work. What would you think of covering the exposed ply ends (when the box is open) on the quilted maple box with a contrasting timber? The same timber as the ends could be used perhaps?
-
6th March 2017, 11:13 AM #5GOLD MEMBER
- Join Date
- Aug 2012
- Location
- Imbil
- Posts
- 1,167
I like the concept the added base gives lift and sets it off well,not much to say about the material it is stunning so all round nice pieces you must be pleased with the outcome.
Regards Rod.Rod Gilbert.
-
6th March 2017, 01:00 PM #6GOLD MEMBER
- Join Date
- May 2013
- Location
- Rockhampton QLD
- Age
- 68
- Posts
- 2,343
Absolutely beautiful.
Ross
-
6th March 2017, 02:57 PM #7
Thanks for the positive comments.
Aldav, Thank you for your comments. My design preference was to try and present the quilted maple piece as one piece. I understand the visual issue with the end grain of ply but I chose to accept that because the box is primarily viewed when closed. I just prefer the continuous look where the joints are hardly visible because the grain is hardly interrupted..And my head I'd be a scratchin'
While my thoughts were busy hatchin'
If I only had a brain.
-
6th March 2017, 03:50 PM #8
-
6th March 2017, 09:25 PM #9
Ruddy, Your craftsmanship is world class and rightly recognized thus...beautiful sir, Cheers, Peter
-
6th March 2017, 11:38 PM #10
Very interesting design and well executed - they look great Plenty of scope in the designs for a secret compartment or two as well - I'll put that one in the memory bank for later
-
7th March 2017, 03:28 PM #11
Wood pixel.
Someone who had been into marquetry had some excess veneer and the quilted maple was part of that stash. It was a stunning piece of veneer.And my head I'd be a scratchin'
While my thoughts were busy hatchin'
If I only had a brain.
-
7th March 2017, 03:57 PM #12GOLD MEMBER
- Join Date
- May 2015
- Location
- Brisbane
- Posts
- 1,148
Lovely work Ruddy. I have seen a similar design and had made a sketch of it for a future make.
-
7th March 2017, 05:26 PM #13
Hi Double d,
Thanks for the comments.
I have a few versions on SketchUp if you want them. They are ideal if you want to fiddle about with different dimensions and see how they look in 3D mode.And my head I'd be a scratchin'
While my thoughts were busy hatchin'
If I only had a brain.
-
8th March 2017, 09:46 PM #14GOLD MEMBER
- Join Date
- May 2015
- Location
- Brisbane
- Posts
- 1,148
Thanks Ruddy, when it comes time i might take you up on the offer.
Similar Threads
-
Box Drawers.
By double.d in forum BOX MAKINGReplies: 3Last Post: 29th March 2016, 07:23 PM -
Drawers for 4wd
By pmccar06 in forum WOODWORK - GENERALReplies: 6Last Post: 25th July 2010, 12:45 PM -
Log drawers
By mr.incredible in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 17Last Post: 24th March 2010, 10:06 AM -
Mdf Drawers
By Squirrel in forum WOODWORK - GENERALReplies: 13Last Post: 2nd February 2007, 12:05 PM -
some drawers WIP
By mic-d in forum WOODWORK PICSReplies: 15Last Post: 27th October 2006, 02:14 PM