Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 9 of 9
  1. #1
    Join Date
    Jan 2006
    Location
    Inverloch
    Posts
    11

    Default Boxmakers - Help requested

    Hi all,
    It's been quite a while since I have posted. The cedar workshop is finally finished . Recently I gave my grandson (10 months) a handcarved wooden box, made by my father in the 30s. It is about 9" square and about 4" high, to this I added a good part of my coin accumulation. Hopefull young Max will have fun sifting through it as he gets older.
    I have another grandchild due later this year and I decided to build a decorative wooden box myself using some varieties of Australian timber. I actually purchased 4 pieces of Bookmatched timber - 369mm * 80mm * 13mm of fiddleback Spotted Gum as a starter.

    Sadly just last week I received some shocking news on the health front which means that it is very unlikely that I will be able to complete/start this project.

    Can any of you boxmakers assist? Would someone be able to make a box, using the wood above, or otherwise, its not important or would someone have a box of a similar size that could be for sale.

    Ideally whether the wood can be used or not I would like to send it to whoever is able to help either as part payment or to be used.

    I would of course pay cost of the box, all postage etc involved.

    If you can help please pm me.

    Over to you, kind regards

    Peter
    Last edited by ubeaut; 14th October 2006 at 03:21 AM.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2006
    Location
    Bowral, NSW, Australia
    Age
    74
    Posts
    1,471

    Default

    Private message sent.

    Carry Pine

  4. #3
    Join Date
    Jan 2006
    Location
    Inverloch
    Posts
    11

    Default

    Hope I have replied to both PM's, I have just had a stint in hospital but back on deck. Posting in the thread is OK need not be a pm
    regards

  5. #4
    Join Date
    May 2005
    Location
    Melbourne
    Posts
    426

    Default

    I'd love to help out but my skills aren't where I'd like them to be. One day when I grow up I'd like to do something like this for someone.

    So to those who can PLEASE help

    Thanks Heaps
    Andrew

    |^^^^^^^^^^^^^^| |^^^^^^^^^^^^^| ||
    | .....BIGGER ......._____| | ...BEER TRUCK.....| ||´|";,___.
    |_..._...__________/====|_..._..._______==|=||_|__|..., ] -
    "(@)´(@)"""´´" *|(@)(@) "(@)´(@)"""´´"*|(@)(@)****(@)

  6. #5
    Join Date
    Jan 2006
    Location
    Inverloch
    Posts
    11

    Default

    A rough drawing of the original box and a pic of the wood that I purchased
    regards

  7. #6
    Join Date
    May 2000
    Location
    Clovelly Park SA
    Age
    54
    Posts
    729

    Default

    G'day Peter,

    I would love to help you out if you would like me too. Please let me know via here, PM or email.

    Best of luck buddy.

    GazAly.
    Greatest Movie Quote Ever: "Its good to be the king!"
    ____________________________

  8. #7
    Join Date
    Jan 2006
    Location
    Bowral, NSW, Australia
    Age
    74
    Posts
    1,471

    Default

    Hey Gaz, get back to that games box and planning for the Crow's revival in '07.
    Are those sides sanded to 2000 grit yet or are you using a Terry Gordon smoothing plane?

    Carry Pine

  9. #8
    Join Date
    May 2000
    Location
    Clovelly Park SA
    Age
    54
    Posts
    729

    Default

    Quote Originally Posted by Carry Pine View Post
    Hey Gaz, get back to that games box and planning for the Crow's revival in '07.
    Are those sides sanded to 2000 grit yet or are you using a Terry Gordon smoothing plane?

    Carry Pine
    Who's Terry Gordon?
    Greatest Movie Quote Ever: "Its good to be the king!"
    ____________________________

  10. #9
    Join Date
    Jan 2006
    Location
    Bowral, NSW, Australia
    Age
    74
    Posts
    1,471

    Default

    Terry Gordon- plane maker extrordinaire- worth a look on his web site or if you make it to one of the wood shows.

Similar Threads

  1. More Eagles as requested
    By Lin in forum SCROLLERS FORUM
    Replies: 5
    Last Post: 3rd May 2006, 08:25 AM
  2. Boxmaker's Router Table - WIP
    By Zoot in forum BOX MAKING
    Replies: 9
    Last Post: 15th February 2006, 02:28 PM
  3. Boxmaker's Router Table
    By Zoot in forum ROUTING FORUM
    Replies: 0
    Last Post: 14th February 2006, 08:29 PM
  4. Tablesaw advice requested
    By jow104 in forum WOODWORK - GENERAL
    Replies: 34
    Last Post: 16th August 2005, 12:20 AM
  5. Thicknesser info requested
    By echnidna in forum JOINTERS, MOULDERS, THICKNESSERS, ETC
    Replies: 4
    Last Post: 28th January 2005, 08:32 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •