Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
Thread: Cufflink Box
-
12th September 2013, 03:47 PM #1GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,191
Cufflink Box
Hi all,
A lady asked me to make her a cufflink box to hold all her husband's cufflinks in. She gave me her rough measurements of about 250x100mm. It turned out a very simple but elegant box, I made two of them. All from that same very old rosewood I mentioned before. I went for a 20mm diameter (works out 22mm diameter with the suede on it), to hold more chunkier type cufflinks which I have seen about. It's a bit deeper than the 100mm.
I just wanted to share the results with you,
Regards, Paul
-
12th September 2013 03:47 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th September 2013, 06:26 PM #2
I like it.
Regards.Hugh
Enough is enough, more than enough is too much.
-
12th September 2013, 08:12 PM #3
-
12th September 2013, 08:43 PM #4
A fine box. The rosewood is beautiful.
And my head I'd be a scratchin'
While my thoughts were busy hatchin'
If I only had a brain.
-
12th September 2013, 10:36 PM #5
I must move in the wrong circles . . I don't even know anyone that wears cuff-links
Very nice looking box Paul
-
12th September 2013, 11:49 PM #6GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,191
to be honest, I don't either, I'm a professional beach bum now,.!
Paul
-
12th September 2013, 11:56 PM #7GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
What AlexS said above
Well done!regards,
Dengy
-
13th September 2013, 07:57 AM #8
That is triple awesome. I like this wood box! Simplicity at its best.
-
13th September 2013, 05:54 PM #9GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Hi PAul, what timber did you use for the keys? Makes a very nice contrast
regards,
Dengy
-
13th September 2013, 09:22 PM #10GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,191
Hi there,
For the keys I used jellutong, I've got a bit of that laying around, plus its a very soft timber also. And yes adds a nice contrast to any darker timber. I've made a sled (jig) for my home made router table also, which makes cutting these keys very simple and foolproof. I should do a photo of my sled and post it on here. When my box is locked into place, just a few simple pushes across my 4mm straight bit and it wont vary from its path.
Matter of fact I'll take a photo of it tomorrow and post it here,
Regards, Paul
-
13th September 2013, 09:44 PM #11Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Gotta agree with everyone. Simple, elegant and a great use of the rosewood!!
-
14th September 2013, 11:08 AM #12GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,191
Cufflinks box and mitre key cutting sled
Hi all again, as promised I took some photos of my mitre key cutting sled/jig. I hope you can follow it by the photos. I have two fences for my router table, long one and short one of course. They both swivel from tee nuts. I use the long one to work out where my sled will slide, clamp the end of that down. Then I clamp my other shorter fence alongside it to create a track for the sled to slide along in. That way there is no outward movement from the force of the router bit. (4mm straight bit). The bottom runners of the sled also have laminex glued to them, which makes the sled slide very easy along the router table top, also laminex.
Any size box is easily clamped into the sled with the adjustable clamps.
-
14th September 2013, 09:33 PM #13GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
That is a very neat jig Paul, I like the fixed sides that eliminates any risk of the box moving on the jig. Thanks for sharing these pics
How do you actually cut the keys to suit the mitre key slots?regards,
Dengy
-
14th September 2013, 10:29 PM #14GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,191
Hi there Dengue,
Pretty simple really, I just thickness/sand a slice of jellutong, or whatever timber I intend to use down to 4mm. Then I just cut oversize triangles on my bandsaw. Put a bit of selleys rapid set aquadhere in the key slot with a matchstick, push the oversize triangle in. Make sure its all the way in. Leave to dry then sand back on a belt sander. A nice light sand as there isn't much timber to actually sand off, just the oversize.
Thanks for your comments,
Paul
Similar Threads
-
Cufflink Box
By groeneaj in forum BOX MAKINGReplies: 5Last Post: 4th January 2010, 06:21 PM