Thanks: 0
Needs Pictures: 0
Results 1 to 4 of 4
Thread: Two dovetail jewellery boxes
-
13th March 2018, 10:45 PM #1Novice
- Join Date
- Mar 2018
- Location
- Northern Sydney
- Posts
- 10
Two dovetail jewellery boxes
Greetings from a new chum to this forum.
I've made a few boxes as gifts for friends and family since my wife bought me a Gifkins Dovetail jig about 10 years ago, but late last year a colleague from my wood turning group gave me the number of a friend of his who wanted to commission some 21st birthday gifts for her grand children. The pics below show the results.
The first one was about 27cm x 15cm x 7cm, in New Guinea Rosewood with a Tasmanian Myrtle top panel, finished with Danish oil. I put some green synthetic felt in the bottom of it. She was very happy with it. She planned to stick an engraved plaque in the top saying "Happy 21st Birthday ...".
The second one is bigger, about 33cm x 18cm x 9cm, also in New Guinea Rosewood but with a Tasmanian Blackwood top panel, also finished with Danish Oil. The size was dictated by the width of the Blackwood board that I had. It gets delivered tomorrow and hopefully she will be happy with this one also, which means there will most likely be a couple more to do during the next year or so.
In both boxes the carcass timber is about 7mm thick, while the tops are about 8mm with the edges routed down to 4mm to fit into slots routed inside the sides. The bases are 4mm marine ply. The sides and tops were cut from 42mm material, sliced into three (about 11mm) on the bandsaw then thicknessed.
The boxes were made in one piece then cut apart on the band saw and sanded. The hinges are from Timberbits (I think).
The router is a Ryobi 1/2" mounted in an Aldi router table - noisy but it works OK.
They don't really compare with some of the great work you guys exhibit, but I was happy with the results.
regards, Colin
20171111_090256.jpg20171111_090226.jpg20180126_173103.jpg20180126_173153.jpg
-
13th March 2018 10:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th March 2018, 06:36 AM #2
Well done on the boxes and some very nice grain pattens showing on the tops.
-
14th March 2018, 07:47 AM #3
Nice work on those boxes. I like the proportions and you've used nice timbers.
Can I suggest that for your next boxes, you look at good quality solid brass hinges, and consider some form of opening grip, either a lifting handle or a finger slot, or a clasp.
Really nice work.
-
14th March 2018, 12:38 PM #4Novice
- Join Date
- Mar 2018
- Location
- Northern Sydney
- Posts
- 10
Thanks for your nice comments Christos and Alex - I will investigate other hinges.
I'm pleased to report that my customer has gone away happy with the second box today, and has put me on notice for two more for this time next year.
I'll be away for the Sydney wood show so I just might need to go visit Trend Timbers later in the year for some interesting top panels.
cheers, Colin
Similar Threads
-
Jewellery Boxes, made in Bunbury, WA
By africansurgeon in forum BOX MAKINGReplies: 27Last Post: 26th June 2016, 08:58 PM -
A pair of jewellery boxes - Rosewood and Sassy
By ajw in forum BOX MAKINGReplies: 10Last Post: 20th December 2013, 06:36 PM -
anyone have plans, jewellery/ trinket boxes
By horse123 in forum BOX MAKINGReplies: 2Last Post: 11th February 2009, 12:46 AM -
Jewellery Boxes
By johnc in forum BOX MAKINGReplies: 9Last Post: 10th October 2007, 12:11 AM -
Good quality linked chain for jewellery boxes
By Barry F in forum WOODWORK - GENERALReplies: 4Last Post: 13th December 2005, 04:38 PM