Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Dovetail key boxes
-
30th September 2012, 04:56 PM #1mpartridge Guest
Dovetail key boxes
Hi fellow box makers i was wondering the easiest way to cut dovetails by hand and if anyone could give me some instructions for a jig please. Im looking to make some Dovetailed box's instead of mitered box's like I have done in the past, and if anyone could possibly tell me an easy way to do it without a router (i don't have one ) I would greatly appreciate it and will upload some photos of my first Dovetail that i make with my fellow box makers advice.
-
30th September 2012 04:56 PM # ADSGoogle Adsense Advertisement
-
30th September 2012, 05:11 PM #2
Suggest you watch this video, as a starting point.
That didn't work as expected, meant Paul Sellers makes a dovetail box (part 1 of 4) - the dovetailsChris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
30th September 2012, 05:29 PM #3mpartridge Guest
Yes that helped a lot thanks for that link chris
-
30th September 2012, 09:15 PM #4
It may just be a matter of interpretation, but I see a dovetail key box as a mitred box which has dovetail keys fitted accross the mitres. Generally primarily cosmetic, but the do provide mechanical fastening at the same time. I suspect your thread would be more appropriately titled Hand Cut Dovetails.
This is a guide to cutting dovetail key joints using a router, no reason why it could not be done with hand tools, but would need a degree of skill and experience to get spot on. You may be asked to subscribe to a free email tips mailing list to access the link, if so, it is benign, one email per week with tips and an occasional promo for their mags and books, much less intrusive than some American mags, and they don't sell/share the mailing list.Last edited by malb; 30th September 2012 at 09:25 PM. Reason: Link did not work as expected, replaced it and added a note about being asked to subscribe to mailing list
-
1st October 2012, 09:23 AM #5
-
1st October 2012, 09:48 AM #6
-
1st October 2012, 01:45 PM #7
-
1st October 2012, 08:37 PM #8
-
1st October 2012, 10:45 PM #9GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Many thanks for sharing your knowledge, AlexS, there is so much to learn for all of us.
regards,
Dengy
Similar Threads
-
my first dovetail jointed boxes
By Pauls321 in forum BOX MAKINGReplies: 20Last Post: 12th December 2011, 09:19 PM -
Dovetail Tissue Boxes
By Billyboydes in forum BOX MAKINGReplies: 10Last Post: 24th June 2010, 05:51 PM -
Is a Glued Dovetail Joint Stronger Than An Unglued Dovetail
By echnidna in forum WOODWORK - GENERALReplies: 15Last Post: 29th July 2006, 10:03 PM -
Dovetail boxes
By silentC in forum WOODWORK - GENERALReplies: 58Last Post: 28th June 2005, 09:51 PM
Members who have read this thread: 0
There are no members to list at the moment.