Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Engraved Lid on Rosewood Box
-
9th February 2015, 01:59 PM #1GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,184
Engraved Lid on Rosewood Box
Hi all, I've had this idea in the back of my mind for a couple of months now, and finally got around to doing something about it. I happened to come by a very old pantograph engraver about 40 years old, cost me a carton of beer. Fortunately I had used one of these many a times years ago, when we first kicked off a trophy business in our last town back in the mid 1980s. My mate had a pantograph engraver and I borrowed it a lot until I bought myself a nice new computer engraver, wish I still had it. But we sold our sideline trophy and engraving business to the local toy/sports shop.
Anyway,......I had to come up with some templates of fancy letters, the ratio of this old pantograph engraver is anywhere from 1:2 to 1:7. Hence if I have a template letter say 100mm in height, the highest I can engrave it is 50mm, and so forth.
I then also organised a set of fancy borders, but the one shown in the main photos was just to intricate, so I made up another two sets myself, much more simpler and nice looking.
So the box in the photos will become my wife's, her initial is R. Then I have a set of every other letter in the alphabet, I've put up B and H here with my two other borders, for samples.
I find that the rosewood engraves beautiful, its a very non grainy timber and cuts easy.
Paul
-
9th February 2015 01:59 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th February 2015, 02:07 PM #2
Hi,
The engraving adds a classy touch to a beautiful box.
RegardsHugh
Enough is enough, more than enough is too much.
-
9th February 2015, 03:36 PM #3
A handsome box. You should have some fun with the pantograph.
I like the way the initial personalises the box.And my head I'd be a scratchin'
While my thoughts were busy hatchin'
If I only had a brain.
Similar Threads
-
small engraved plate
By smiife in forum WOODTURNING - GENERALReplies: 10Last Post: 10th July 2014, 08:42 AM -
20 Pens from Cookie engraved
By PenTurner in forum PENS FOR THE TROOPSReplies: 7Last Post: 19th October 2013, 05:57 PM -
Engraved Boxes
By PenTurner in forum BOX MAKINGReplies: 9Last Post: 23rd December 2009, 09:08 AM -
Engraved Makers Mark
By Zoot in forum CNC MachinesReplies: 4Last Post: 3rd June 2008, 08:24 AM -
Engraved tags
By Gaza in forum HAND TOOLS - POWEREDReplies: 1Last Post: 23rd October 2005, 10:41 PM