Needs Pictures: 0
Results 1 to 15 of 18
Thread: European Beech Box
-
27th May 2019, 06:52 PM #1GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 1,068
European Beech Box
Last year a good friend gave me a piece of leftover European Beech. I was a bit lukewarm as my memories of European Beech were government and school furniture in post-war England. The stuff seemed to grow on trees Still, there was enough to make a box.
As I worked I came to really like the timber for its pinkish-brown colour, its simplicity (no strong grain pattern) and its ease of use. The pictures don't show the colouring that well but here it is:
Size: 275x180x75
Timber: European Beech with steamed European Beech veneer top panel
Inlay: Ripple Sycamore
Lock and hinges: smartware by Andrew Crawford
Escutcheon: Ripple Sycamore (supplier no longer operating)
Lining: Burgundy suede split over white art card. Double sided tape and craft glue (Eckersley's Art Supplies)
Tray: European Beech, black-dyed boxwood.
Finish: Behlens pre-cat nitrocellulose sanding sealer and Behlens satin Stringed Instrument Lacquer (Guitar Australia).
2CF31B5C-635C-4B0C-B205-50F0D8949CF2.jpeg
Tray dividers were attached to the tray sides (and each other) by small mortice and tenons.
ECDDB0EB-C38E-4048-A0D3-FE024AFD4D8C.jpeg
In this case I lined the tray walls as well as the tray bottoms. Gives a good result but it means cutting and fixing 15 panels for the tray plus 5 for the box carcass. Did I mention I don't enjoy lining?
9665F710-2879-473F-9B41-796A45C2061E.jpeg
The top of the tray is capped with black-dyed boxwood as an experiment. I quite like it.
Also experimental are the suede tray lifts at either end. These are glued into recesses in the sides, sized to bring the suede level with the inner side of the tray. This way they do not interfere with the linings on the sides, which would otherwise have a 'speed hump'.
The tray is mitred with keys made of white/black/black/white veneers. Given the light colour of the beech I probably should have made up some black/white/white/black keys, but I didn't.
FB6889A9-A65E-4E39-84F5-F600D1026719.jpeg
All together I liked the end result more than I expected. Perhaps something more showy next time
Back to the woodpile!
Brian
-
27th May 2019 06:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th May 2019, 07:50 PM #2GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,191
Hi Brian, that is one lovely box, very impressive indeed. Looks superb. I like the way you do the lining on the sides. I've got a few boxes under construction at present, one of which is a watch box where I want to line the sides of each compartment. A chap contacted me about a watch box and said he wanted the sides of each watch compartment lined as he was afraid of his watches being scratched by the timber. So I have allowed extra space for such. I hope my side linings turn out as good as yours.
Well done again,
Paul
-
27th May 2019, 10:36 PM #3GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 1,068
Thanks for the kind comments, Paul.
I think the big thing is what you use for lining. I now avoid anything that is woven such as imitation suede or, in most cases, velvet as the frayed edges drive me nuts. Genuine suede or Toray ultrasuede work so well.
Good luck with the watch box- your previous boxes are beautiful!
Brian
-
27th May 2019, 11:17 PM #4GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,191
Hi and thanks for that info Brian. I'll let you know how my lining on the sides go. I do intend on folding the suede fabric over that 1mm white cardboard. On the bottom I'll pad it with wadding for a nice cushiony effect as I always do. I did try using foam, but prefer the wadding. The foam was ok with "performance velvet" as it is much thicker and does not stretch at all. But overall I prefer the wadding.
Paul
-
28th May 2019, 11:37 AM #5SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Hervey Bay
- Posts
- 250
Lovely box - you've clearly put a lot of work into that.
One question - where do you source your white/black veneers from?
I'm hoping to try to do my own banding.
Thanks, Jeff
-
28th May 2019, 01:54 PM #6
Another fine example of your fastidious work Brian. Mortice & tennon for the dividers just shows how much effort you put in to getting a quality item, and even the contrasting colours in the built up keys. Great work.
Dallas
-
28th May 2019, 06:10 PM #7
-
28th May 2019, 06:42 PM #8GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 1,068
Thanks for the very kind comments, guys.
Paul - I haven’t tried the wadding. Is this the “batting” that can be bought from Spotlight or similar?
Jeff - I think I bought the last lot from Luthiers Supplies (https://luthiersupplies.com.au/luthi.../guitar-veneer) although I think they were on the expensive side.
I’ve also bought from Rita and Peter at The Veneer Shop in Budapest, Hungary (https://www.etsy.com/au/shop/thevene...on_id=23333738). They are lovely people to deal with and the postage from Hungary is very reasonable. Their prices are usually shown as ‘per 2 pieces’ or sometimes more. For white veneer I generally use either maple or, if I can get it, sycamore.
Treecycle - aw, shucks . Thanks! I haven’t yet made a box that I’m completely happy with but I’m enjoying the journey!
Best regards,
Brian
-
28th May 2019, 08:12 PM #9SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Hervey Bay
- Posts
- 250
Thanks for that Brian,
I'll try those out.
Cheers, Jeff
-
28th May 2019, 11:05 PM #10GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,191
Hi Brian, Yes its from Spotlight. Women use it for quilting. It comes in various thicknesses, you just need to "feel" the range to see what suits you best. I bought a roll of it a couple of weeks ago. Sorta like not to thin and not to thick, just sufficient to provide nice padding between your suede and the cardboard.
Paul
-
1st June 2019, 01:41 PM #11SENIOR MEMBER
- Join Date
- Jan 2010
- Location
- Auckland New Zealand
- Posts
- 312
Very nice box as always Brian.
-
1st June 2019, 02:37 PM #12GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Top class outcome there, Brian. Congratulations. The timber and the inlay really make this, great choice, so nice just to look at. That lining is something else, well done !!
regards,
Dengy
-
1st June 2019, 04:06 PM #13GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 1,068
I really like the understated look - but having said that here’s a sneak peek at part of a box I’m working on that will not be quite so plain! If it goes OK I will do a WIP report. It’s a test box for a larger one I have planned:
C951F03C-7D4D-4E45-AD31-25AC7D89D72C.jpeg
Brian
-
1st June 2019, 08:26 PM #14GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Crikey, Brian, that's a bit in your face, eh? Will be very interested to see how this turns out. Amazing timber
regards,
Dengy
-
1st June 2019, 11:03 PM #15GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 1,068
Hi Joe,
This is Ebony Macassar. I have a few pieces that needed to be used. It’s the closest thing to coramandel which I think has long since disappeared. Anyway, watch this space!
Best,
Brian
Similar Threads
-
Blotchy European Beech
By Ross Lambert in forum FINISHINGReplies: 3Last Post: 3rd June 2013, 09:27 PM -
Steamed Beech (European)
By Richard Findley in forum TIMBERReplies: 1Last Post: 5th August 2007, 05:09 PM -
finishing european beech
By robjob in forum FINISHINGReplies: 0Last Post: 27th May 2007, 02:49 AM -
European Steamed Beech
By bosun in forum WOODWORK - GENERALReplies: 1Last Post: 19th December 2005, 02:44 PM -
Stains and oils on European beech
By geoffa in forum FINISHINGReplies: 0Last Post: 20th June 2004, 08:03 PM