Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Glue problem
-
9th March 2012, 07:52 PM #1
Glue problem
Been using Tightbond wood glue for years. Suddenly it's leaving a blackish/grey stain on the timber. First though it might be the el-chepo brushes I was using to apply it, but that's not the answer.
Anyone else had this problem, or have any ideas why it's happening.
DIY DAN"Life is what happens while you are busy making other plans" (John Lennon)
-
9th March 2012 07:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th March 2012, 08:15 AM #2
Hey Dan. Make sure the glue hasn't gone off. (use by date). I've been using Titebond 2 glue for years, and the only time I had an issue was that the glue was old. I don't buy in big quantities now, as I reckon the heat in the shed sends it off after 10 months or so.
I never forget anything I remember !!
-
10th March 2012, 09:12 AM #3Awaiting Email Confirmation
- Join Date
- Jul 2008
- Location
- Central Illinois, USA
- Age
- 79
- Posts
- 65
DIY Dan,
I had a similar problem a couple of years ago with Tightbond while working with oak. The problem turned out to be iron stains. A brush with a metal collar was left in the glue bottle and started to rust. The dissolved iron caused dark gray to black spots on the wood. The tanic acid in the oak reacted with the iron and caused the stains. Changed out the glue and the problem was solved.
Hope this helps,
Bob
-
13th March 2012, 12:19 PM #4
Hi Dan,
I have found it an issue particularly with Blackwood.
Out of interest I have been using Gorilla Glue for a year and just recently purchased a bottle of Titebond 3 (Carbatec dropped the price to $15), it appears to have changed formula. It is thicker than I remember.
regardsBilly
Similar Threads
-
UHU Super glue - Miracle glue or sham?
By Lignum in forum WOODWORK - GENERALReplies: 33Last Post: 17th May 2016, 10:42 AM -
Router problem or operator problem ?
By Ozziespur in forum WOODWORK - GENERALReplies: 5Last Post: 15th August 2011, 03:23 PM -
Anyone Used a Glue Joint Bit for Table Top Glue-ups?
By TP1 in forum WOODWORK - GENERALReplies: 13Last Post: 25th March 2010, 11:28 PM -
Threaded rod glue into redgum knob - best glue?
By ian56 in forum GLUEReplies: 5Last Post: 21st January 2010, 03:47 PM