Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 14 of 14
Thread: Glue - what’s best
-
4th December 2020, 02:27 PM #1GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Sydney
- Posts
- 1,557
Glue - what’s best
Team,
in another thread/post I have been discussing glue creep and my relative success/failures as to getting/not getting this nasty little feature of PVA glue on my adventures. I have to a certain degree been quite lucky when it comes to creep within my box making joints.
having said that, what type of glue do you all use and have any of you discovered creep in your creations? I predominantly use Titebond II and III.
thanks
Richard
-
4th December 2020 02:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
4th December 2020, 04:33 PM #2SENIOR MEMBER
- Join Date
- Jul 2006
- Location
- Mooroolbark
- Posts
- 522
Glue
Hi Richard,
when it comes to glueing any timber I'm a Titebond III man myself. I started using it years ago and have never had any problems with it so i haven't changed.
Cheers,
Peter
-
4th December 2020, 06:39 PM #3Member
- Join Date
- Apr 2015
- Location
- Blenheim, New Zealand
- Age
- 78
- Posts
- 55
Hi Richard,
It's normally Titebond for me as well - III on dark woods and II on light colours to stop the glue line showing because it sometimes contrasts with the wood.
Rex
-
5th December 2020, 01:04 AM #4Member
- Join Date
- Jan 2008
- Location
- Central, Michigan, U.S.A.
- Posts
- 94
I use "Titebond molding and trim" glue and it works on end grain along with very little creep ( I got it from the rep from a demonstration at our wood club) . I see they also have "Titebond no-rum no drip" as well but have never used it?
-
5th December 2020, 01:51 AM #5
TB2 or 3, to match colour, on every box so far.
-
5th December 2020, 10:17 AM #6GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 1,068
Hi Richard,
Mostly TB2 or TB3. Sometimes Sellys Aquadhere. Never had a failure with any of these.
TB Extend when it’s a complex glue-up that needs more open time.
For a rigid bond laminating curved surfaces (where spring back needs to be restricted) I use Cascamite (urea formaldehyde) or West epoxy. No particular reason for West brand other than it’s easy to find and i’m used to it.
Older veneer repairs - hide glue. Since I don’t use this a lot I use TB Liquid Hide Glue.
CA glue is never far from hand (Zap) for those little chip repairs.
I can’t really comment on the issue of wood creep other than to say I avoid wide solid-wood panels by veneering a stable substrate (ply or MDF). If a solid wood box top is required I make it as a floating panel.
Best regards,
Brian
-
5th December 2020, 11:10 AM #7
I'm almost out of TB here (my balcony studio!) and the many bottles I have in storage are a right PITA to get to.....
A bit easier to order more.
Do others find Aquadhere decent?
IF I had to buy some glue from a local supply that isnt TB, what would people recommend?
edit - Deeerrrrpppp.... turns out Total Tools here sells TB. Nice!
-
5th December 2020, 12:21 PM #8
I mostly use Titebond 3. If I have a tricky glue-up I use their liquid hide glue.
I also use actual hot hide glue. There are some things that this is still the best for the job. For example, rub joints that cannot be easily clamped, veneering.
-
5th December 2020, 02:26 PM #9Senior Member
- Join Date
- Jan 2005
- Location
- Campbelltown NSW
- Age
- 77
- Posts
- 335
I get good results with Gorilla Wood Glue from the big green shed.
-
5th December 2020, 05:59 PM #10
I tried Gorilla Wood Glue for my latest bottle of glue and although it looks similar to Titebond II it seems to grab a lot quicker.
Franklin
-
5th December 2020, 09:37 PM #11GOLD MEMBER
- Join Date
- Aug 2004
- Location
- Perth WA
- Posts
- 2,035
Selleys aquadhere has always worked for me.
Experienced in removing the tree from the furniture
-
6th December 2020, 07:56 AM #12GOLD MEMBER
- Join Date
- Sep 2011
- Location
- Valla Beach
- Posts
- 1,186
Same here Rod, and before I got into box making I built every piece of timber furniture throughout my house with it. Never had a problem. I use the "quickset" quite often also when needed to get me out of strife. But the normal indoor one is perfect.
Paul
-
6th December 2020, 10:53 AM #13GOLD MEMBER
- Join Date
- Oct 2014
- Location
- Caroline Springs, VIC
- Posts
- 1,645
Titebond 3 is by far the worst offender of glue creep. When I speak of glue creep, I speak of glue being pushed up and out of the joint creating ridges between each board, which can be seen and felt. The more flexible the glue, the greater the chance of this occurring. Titebond 3 is very flexible in its cured state, as it has to be flexible to withstand the pressures applied to it when used in exterior work. Titebond Original on the other hand almost snaps like sugar glazing (can't think of a better example), because it doesn't need the added flexibility of TB3 for internal use. Though, TB Original washes off with water even after cured (water/steam = same/same).
If you think about it like 'Blue-tack', you can stretch out the blue tack, and the colour changes to a lighter blue, almost white. But then if you try to push the two ends of the stretched out rope of blue tack, it doesn't reform to its original shape. The stuff in the middle of the "stretched out rope of blue tack" will belly outwards, or with TB3, push out of the joint creating the ridge lines. If the glue doesn't stretch due to a lack of flexibility, happy days, minimal to zero glue creep. TB2 is better than TB3 for glue creep and I have had few issues with TB2, but TB3 is better for water resistance.
-
6th December 2020, 11:21 AM #14Senior Member
- Join Date
- Sep 2016
- Location
- Bentleigh East
- Age
- 50
- Posts
- 423
I like gorilla wood glue. Sometimes I have to chisel or plane the squeeze out, which dries dark brown and behaves halfway between rubber and stone, if that makes sense? Really hard but with a little bit of flexibility. It works for me and it's also supposed to be water resistant (which I haven't tested). Doubt if it's food safe though, I haven't found any info.
Similar Threads
-
UHU Super glue - Miracle glue or sham?
By Lignum in forum WOODWORK - GENERALReplies: 33Last Post: 17th May 2016, 10:42 AM -
Timber - coating with CA glue Super glue)
By Goggomobile in forum WOODTURNING - PEN TURNINGReplies: 11Last Post: 18th September 2015, 01:51 PM -
Hot Melt Glue for Glue Blocks - Yes or No
By Hermit in forum WOODTURNING - GENERALReplies: 23Last Post: 12th May 2014, 11:00 PM -
Threaded rod glue into redgum knob - best glue?
By ian56 in forum GLUEReplies: 5Last Post: 21st January 2010, 03:47 PM