Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 33 of 33
Thread: Jewelery box
-
11th September 2013, 06:03 PM #31
Nearing the end.
Made some feet to keep the box off its base. Found this piece of African blackwood which is very dense and hard. Machined a rebate to hang off box.
48w.jpg
It would not cut nicely on tablesaw to get the lengths or mitres so had to resort to hand work. Made a stop for length consistency and a white piece of wood with 45 degree format, this was screwed to sawbench and also worked as a pull lever and jammed the wood to make cutting quite easy.
49w.jpg
glued in position to base.
50w.jpg
Front view. (I think the lid will need another button and I shall use earth magnets to keep lid in closed position)
51w.jpgwoody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
11th September 2013 06:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th September 2013, 07:43 PM #32
Good solution to the miter cutting. I will keep that in mind for the odd foot that I might need.
Would it be a smaller button for the lid?
-
13th September 2013, 09:43 PM #33
Similar Threads
-
jewelery box designs
By lLeo in forum WOODWORK - GENERALReplies: 2Last Post: 10th April 2010, 10:30 PM -
Another jewelery box
By BobR in forum WOODWORK PICSReplies: 10Last Post: 20th December 2005, 10:44 PM -
Jewelery Box for DIL
By BobR in forum WOODWORK PICSReplies: 18Last Post: 20th December 2005, 03:15 PM -
Jewelery box part
By Andraax in forum WOODWORK - GENERALReplies: 14Last Post: 12th December 2005, 09:06 PM -
Camphor jewelery box
By MikeThePom in forum WOODWORK PICSReplies: 10Last Post: 20th October 2005, 01:18 PM