Mounting 90 degree lock hinges on a box

**LGS** · 14th February 2012, 06:18 PM

Hi all,

I am having difficulty mounting the said hinges to boxes. When I mount them flush with the box carcass and the lid, I find that the box will not close. Digging deeper into the box doesn't seem to work. Am I perhaps trying to mount the hinge too close in to the box?

Here's a pic of what I want to do.

Thanks,

Rob

**Durham Lad** · 14th February 2012, 09:19 PM

Hi Rob, I have used the Brusso 95 degree hinges on a number of boxes and have had no problem as you describe. I have some of the 90 degree version from Carba-tec but have not yet used any. It will be interesting to see if any other forumites have any views on the problem. I can only think that maybe the hinges should may be moved slightly further out from the box frame but only trial and error will prove anything one way or the other. I will watch for other replies with interest, meanwhile good luck. Brian.

**homesy135** · 15th February 2012, 10:03 AM

The first time I used the Brusso 95 degree hinges I let them too far into the box sides and the lid wouldn't open. I had to remount the hinge with the whole of the barrell protruding from the rear of the box to get the hinge to work.

Could this be the problem?

**LGS** · 15th February 2012, 10:26 AM

Hi all,

Homesy,
I think you might be right.
I have resolved the issue, apparently by taking more care with the paring of the size and width of the hinge rebates.
Hooray!!

Regards,

Rob

Thread: Mounting 90 degree lock hinges on a box

Thread Tools

Search Thread

Mounting 90 degree lock hinges on a box

Hinges

Similar Threads

campbell hausfeld 34 degree framing nailer and 30 degree nails

270 Degree Cabinet Hinges

Mounting Wooden Hinges

Help needed in mounting kitchen hinges

Tags for this Thread

Posting Permissions