Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
-
9th July 2006, 02:23 AM #1New Member
- Join Date
- Jul 2006
- Location
- Perth
- Posts
- 2
Extra long dovetail / finger joints
I'm wondering whats the best way to make a long dovetail or finger joint. The joint would be approx. 700mm long. I've noticed that most jigs go up to only 300mm. I plan to join 20mm thick jarrah. Any ideas ?
Thanks in advance.
-
9th July 2006 02:23 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th July 2006, 06:09 AM #2Originally Posted by Gman
the gifkins is very accurate so (*If*) you can line up boards accurately you can bisquit them together on top of one another. Roger has also been known in the past to sell a longer vrsion of his jig.
cheersZed
-
9th July 2006, 11:58 AM #3SENIOR MEMBER
- Join Date
- Aug 2002
- Location
- Boyne Island, Queensland
- Age
- 51
- Posts
- 929
-
9th July 2006, 12:03 PM #4
I'm a bit confused by this. How can you make dovetail or finger joints which are longer than the thickness of the timber ? :confused: I'm assuming it's a box joint, not joining lengthwise.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
9th July 2006, 01:55 PM #5Senior Member
- Join Date
- Aug 2004
- Location
- Western Sydney
- Posts
- 234
Originally Posted by Gumby
Coldamus
-
9th July 2006, 01:59 PM #6New Member
- Join Date
- Jul 2006
- Location
- Perth
- Posts
- 2
Thanks for you help Zed and Dan.
Gumby, i'm actually making a set of boxed legs for a billiard table restoration. So i'm trying to make a nice join along the length of the timber which are 700mm long x 170mm wide, the thickness of the wood is 20mm.
Similar Threads
-
Finger joint jig
By MikeThePom in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 30Last Post: 18th August 2008, 05:43 PM -
Machine Cut Through Dovetail Tutorial
By Bob Smalser in forum WOODWORK - GENERALReplies: 8Last Post: 25th November 2004, 04:11 PM -
Finger Joints
By Chippie in forum TRITON / GMCReplies: 4Last Post: 11th January 2004, 09:36 PM -
Finger Joints
By gazaly in forum TRITON / GMCReplies: 6Last Post: 22nd May 2000, 08:34 AM