Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 28
Thread: Gifkin Jig vs Incra Positioner
-
10th May 2017, 12:04 PM #1GOLD MEMBER
- Join Date
- Aug 2016
- Location
- Brisbane
- Age
- 57
- Posts
- 1,315
Gifkin Jig vs Incra Positioner
I'm trying to decide between the Gifkin Jig and an Incra Positioner system. I realise that they are really 2 different things but I'm blowing my budget to even buy one of them.
I want to be able to easily make accurate box joints and dovetail joints with the router. I don't have a jointer so I was thinking about having a split fence on a router table to be able to do edge jointing.
I am a complete beginner to routing so I don't really know what I want. I'd like to eventually be able to make simple furniture, small boxes, wall hangings, frames and things like that. I basically want to try a variety of things and develop my skills.
A saw the Gifkin Jig demoed at the Maleny Wood Expo and I was really impressed with how easy it is to make these joints. Just perfect for a beginner like me I think. I also like that it is Australian and I've read the great reviews of their customer service.
Another plus for Col is that I would be very interested in his box making course.
With the Incra positioner super system, it can also be used to make joints but it is a high quality fence - which I'd like to have. Although what I really need is just a square split fence so it doesn't really have to be an incra 'wonder' fence.
I watched a video of the Incra positioner and it seemed to be a little involved to select the correct set up and prepare everything. However that could have been because the video was explaining everything very carefully. Perhaps after one or two uses it becomes pretty straight forward?
The other plus for the incra is all the positive reviews for it worldwide.
My gut feeling is that the Gifkins jig would be a great way to start for a beginner like me. (Or for someone where time matters).
My dilema is that the Gifkins jig is not cheap. If you elect a package with 3 or 4 templates then you are spending the same as buying the entire Incra Positioner Super System (which is more versatile).
I am going to the USA soon so I was thinking about buying the Incra system while I was there. However I really want the metric version, which I doubt I'll find in a store there so I've gone off that idea.
Any advice?
-
10th May 2017 12:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
10th May 2017, 03:01 PM #2
Personally i'm a fan of the gifkins system. Easy to set up, accurate, quick. I made 19 small spice boxes the other day. Machined the material, cut to length, machined the dovetails and glued up before lunch.
There ain't no devil, it's just god when he's drunk!!
Tom Waits
-
10th May 2017, 04:22 PM #3
Hi Dave
please forgive my bluntness, but if you have no way of producing consistently dimensioned wood -- consistent in width, length and thickness -- then both systems are largely a waste of money. Or perhaps, more gently, an expense that you are not ready to exploit.
I would suggest that if your aim is "small boxes" then you really only need one Gifkins template -- either the F5 finger joint or the A10 dovetail
which reduces the initial outlay somewhat.regards from Alberta, Canada
ian
-
10th May 2017, 05:45 PM #4SENIOR MEMBER
- Join Date
- Jun 2007
- Location
- Blue Mountains
- Posts
- 817
I'd go with the A10 dovetail as the first venture. You can make lots of boxes with varying wall thicknesses. Have a look through the box-making section of this forum, if you haven't discovered it yet. Lots of examples there (including mine )
You might even be able to pick up a second-hand Gifkin's unit.
Ian's right though - you need flat, square, accurately dimensioned stock before you start looking at dovetailed boxes.
cheers,
ajw
-
10th May 2017, 06:18 PM #5GOLD MEMBER
- Join Date
- Nov 2012
- Location
- SE Melb
- Age
- 64
- Posts
- 1,278
Have you considered a home made jig for box joint: Another box joint jig. if you using a router.
-
10th May 2017, 06:25 PM #6GOLD MEMBER
- Join Date
- Apr 2014
- Location
- Kew, Vic
- Posts
- 1,068
Hi Dave,
+1 for the Gifkins if dovetails are your thing. I got mine secondhand on eBay - might take a little while, but they do come up for sale. I have various templates and cutters, but for boxes I've never used anything but the A10 template and cutters.
Rockler do a simple box joint jig, although you could easily make one yourself - there are heaps of videos on YouTube.
i agree with ian and ajw about the need for decent squared stock - I found that out the hard way!
cheers,
Brian
-
10th May 2017, 07:40 PM #7SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 651
I haven't used the Gifkins so know nothing about it. I do have the incra positioner and love it. I have only used it a couple of times for box joints and dovetail joints. And for me it is a bit time consuming to set up but if you done it regularly it would probably be alot quicker, as I have to go through the instructions each time as I can't remember. What I do love though is the accuracy it provides with general routing.
-
10th May 2017, 08:31 PM #8GOLD MEMBER
- Join Date
- Aug 2016
- Location
- Brisbane
- Age
- 57
- Posts
- 1,315
This is the sort of advice I need.
Length. Tick. I have a SCMS which can do this.
Width. Mmmmm. Maybe. I have a Triton workcentre 2000. It's a struggle to get an accurate cut but if I measure everything on the table 4 times before each cut then it can be done. It's a lot of work to get consistency.
I find it's impossible to get a consistent dado, rabet etc but it can rip almost OK.
Thickness. Nope. Not even close. I have to buy DAR and hope it's consistent.
Which means 12mm is probably the minimum.
So basically I need a jointer, thicknesser, dust collector, table saw, bandsaw, cnc. Plus new power circuits and lighting and a proper work bench. I've been researching all those things. However I thought I would focus on building a router table and good jig first. Then each other item as I can afford it.
I need more circuits before I can run a dust collector and I should have a dust collector before the other tools. After the router table I might focus on a solid work bench and vice first.
I want to do more than boxes. In fact right now I'm making some little drawers. I think some simple projects with 19mm stock might be a good idea before attempting a fine box. No?
In fact I think I'll start with a spline jig first if I can make the splines on a router table. Then a box or dovetail jig.
Dave
Sent from my SM-G935F using TapatalkMy YouTube channel: https://youtu.be/2_KPRN6I9SE
-
10th May 2017, 09:04 PM #9GOLD MEMBER
- Join Date
- Aug 2016
- Location
- Brisbane
- Age
- 57
- Posts
- 1,315
Because my experience has been mostly limited to the Triton workcentre and all the frustrations with that, I'm really keen to get accuracy easily. In my view that is supposed to be a main purpose of power tools.
For example I really like the incra split fence.
I guess I have almost asked the wrong question because they are 2 different tools.
Sent from my SM-G935F using TapatalkMy YouTube channel: https://youtu.be/2_KPRN6I9SE
-
10th May 2017, 10:44 PM #10GOLD MEMBER
- Join Date
- Nov 2012
- Location
- SE Melb
- Age
- 64
- Posts
- 1,278
I want to do more than boxes. In fact right now I'm making some little drawers. I think some simple projects with 19mm stock might be a good idea before attempting a fine box. No?
In fact I think I'll start with a spline jig first if I can make the splines on a router table. Then a box or dovetail jig.
-
11th May 2017, 12:00 AM #11GOLD MEMBER
- Join Date
- Aug 2016
- Location
- Brisbane
- Age
- 57
- Posts
- 1,315
I have a pocket hole jig and I've made 2 pieces with it. I have a couple of other ideas for it. Pocket holes have their place but I'm not a big fan so far. My guess is that I'll use it for part of a project but look for alternatives for joints that are visible.
Sent from my SM-G935F using TapatalkMy YouTube channel: https://youtu.be/2_KPRN6I9SE
-
12th May 2017, 11:34 PM #12SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- inverloch
- Posts
- 472
If you are having accuracy problems with the Triton I would suggest making a sled. This will improve your work out of sight. Google 'Triton work centre sled' and it will come up with a heap of suggestion.
-
13th May 2017, 05:22 AM #13
Hi Dave
for a not so small number of fine boxes, it is probably most cost effective to purchase the wood required as a (pre-dimensioned) kit. Box kits are relatively expensive, but if you amortize the cost of a Jointer / Thicknesser, bandsaw, drum sander and dusty across 50 boxes, you are probably looking at $100 to $150 per box in machinery. So a few box kits might make sense for you.
Alternatively, you might be able to trade a 6 pack (or slab) for machining services by another forumite.
In terms of utility boxes, I'm finding hand tool methods work fine. With hand tools it's relative easy to adjust joint dimensions to accommodate differences in material thickness.regards from Alberta, Canada
ian
-
13th May 2017, 05:26 AM #14GOLD MEMBER
- Join Date
- Aug 2016
- Location
- Brisbane
- Age
- 57
- Posts
- 1,315
Thank you very much for the suggestion. I had thought about doing that but didn't get around to it because I mostly use the Triton 2000 for ripping. I use the SCMS for cross cuts as much as possible. That does up to 300mm. Now you've recommended it, I'll put that back on the todo list.
Sent from my SM-G935F using TapatalkMy YouTube channel: https://youtu.be/2_KPRN6I9SE
-
13th May 2017, 10:15 AM #15SENIOR MEMBER
- Join Date
- Nov 2007
- Location
- Victoria
- Posts
- 733
I agree with ian. Not sure what your situation with time and money is but by the time you research then buy all that machinery, then get the electrical work sorted then spend time fine tuning then make jigs you probably could have made a few boxes of the pre done stuff.
Have you thought about handplanes ? I can thickness a piece of 19mm thick dar down to 10mm in a few minutes and I dont consider my self any good.
Similar Threads
-
Incra Positioner/Fence
By Chris Parks in forum ROUTING FORUMReplies: 3Last Post: 30th January 2016, 05:32 PM -
Incra Positioner Installation
By plasweld in forum INCRA JIGSReplies: 19Last Post: 12th July 2012, 09:49 AM -
Incra Mike (micro positioner) ??
By scooter in forum WOODWORK - GENERALReplies: 3Last Post: 10th December 2004, 12:47 AM