Thread: How do I finish this with this problem

It might work but the movement of the door would no doubt crackout the filler very soon. Water based wood filler would be a better option and certainly easier to stain to the same degree as the timber.

Pollyfilla granules I find do not sand as smooth as wood fillers.

Try a test piece with pollyfilla and stain first. I presume it is an interior door we are talking about.

all the best


Wallace

Can you cut a sliver of matching wood and glue that in?

Jow,
I would finish the timber work first - otherwise you are guessing what colour it will end up and hoping that your filler will end up the same, not too much chance of that happening. I use coloured wax sticks for filling, they come in a variety of colours and you can mix them together to get different colours. If you want to be really tricky you can even roughly mix two colours together and get a "grain" effect. I use "mirowax" sticks which are made by Mirotone, however I believe it's an Aussie company and may not be available where you are. A good cabinetmaker's supplier should have something similiar.

Mick

I shall have to bite the bullet on one of those suggestions

Thanks