Thread: Applying oil-based paint with a rubber or pad

If...

Never heard of it being done but there has got to be someone who thinks differently and tries to do things one step away from the norm.

Take piccies (before and after) and let us know how it goes please,

The problem with "paints" generally and "oil bassed Resins" used in paints and varnishes is that ther are relativly coarse or long chianed products.

They do not witstand thinning very well at all, and they because they do not cure by evaporation they will not flow like shelacs and other disolved resins will.

So they wont rub.


there are however pad products designed specificaly to work with "paints & varnishes".

Paints realy do perform best with brushes, rollers and spray.

The pads that I speak of are realy more like wide, flat, very short bristled brushes rather than rubbers.

For aluminium, by far the best option is going to be, to mask and spray, if not possible a good fine sash brush.

Remember if you want paint to stay on aluminium you need to get rid of any anodising or powder coat and use a good etching primer first.

cheers

Yeah, after many warnings from the sister Renovation forum as welll I gave it a quick shot yesterday on a spare alu frame. Absolutely useless and probably for all the reasons highlighted by soundman. Back to the brush......