Thanks Thanks:  0
Likes Likes:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Sep 2016
    Location
    coffs harbour
    Age
    81
    Posts
    2

    Default bagpipe restoration and finishing

    Hi All,
    This is my first post so be patient with me please.
    I am currently in the process of restoring an old set of bagpipes made of African Blackwood. I have stripped all the old finish back to bare wood , lightly sanded with 800 grit and thoroughly cleaned with meth spirits.IMHO they are now ready for finishing.The big question is what finish to use.
    As far as I can determine modern makers use some form of friction polish. My research tells me that some friction polishes are susceptible to damage by water and alcohol.While I am not worried about the alcohol I am worried about water damage as bagpipers are often caught out in the rain.How big a problem would this be ?
    I would be extremely grateful for any information on recommended products and techniques that might be suitable for this project.
    I might add that I am after a more subdued sheen rather than an ultra shiny look
    Many thanks

    Dave

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,470

    Default

    Bagpipes are traditionally finished with wax and it is usually a guarded secret as to the actual formula, base is usually beeswax + carnauba wax + ????
    Check U-Beaut products e.g. Traditional wax, EEE etc.

  4. #3
    Join Date
    Apr 2002
    Location
    Brisbane
    Posts
    5,773

    Default

    Unless you are going ti chuck em up in a lathe, friction polish is not going to be a goer.

    In addition, if they are old they probably wont run true in the lathe so again friction polish probably not a go.

    Ya cant realy go wrong with shelac.

    cheers
    Any thing with sharp teeth eats meat.
    Most powertools have sharp teeth.
    People are made of meat.
    Abrasives can be just as dangerous as a blade.....and 10 times more painfull.

  5. #4
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,470

    Default

    Pipes are not supposed to be finished to a high gloss, high quality Pipes are waxed to produce a glow rather than a shine wax allows the Pipes to breath while still giving protection, you do sometimes see pipes that have a gloss finish however you will find that these a very cheap low quality examples

  6. #5
    Join Date
    Feb 2011
    Location
    Melbourne
    Posts
    292

    Default

    If you haven't decided on a product, a combination of oil wax may do the trick. Oiling nourishes the the wax seal without a layer. The wax will harden and cure and should repel water however still be "breathable".
    Livos Australia

    <O</O

  7. #6
    Join Date
    May 2008
    Location
    BELL POST HILL, 3215
    Age
    87
    Posts
    2,332

    Default The Pipes.

    Hi All,
    There were 2 Bag Pipe Makers in the Geelong Area.
    Not sure if they still do them.
    Regards,
    issatree.
    Have Lathe, Wood Travel.

  8. #7
    Join Date
    Sep 2016
    Location
    coffs harbour
    Age
    81
    Posts
    2

    Default

    Thank you to all who replied.
    I decided to go with Shellawax friction polish and am more than pleased with the result although in hindsight I would not use a product containing wax for this purpose again.Most bagpipes are decorated with a pattern of beading and combing.The combing consists of a series of fine grooves (usually 6-10)followed by a bead (say 5mm wide )followed by combing, followed by a bead etc etc
    The polish brought up a beautiful lustre on the beading and other smooth parts but the wax built up in the fine grooves of the combing and required many passes with fine thread in each groove to clear it.
    The end result was exactly what I wanted although very time consuming .I am thinking next time I might experiment with hard shellac

    Cheers .Dave

Similar Threads

  1. Blackwood Chair Restoration (Cane seats & Finishing)
    By TrevorMcc in forum RESTORATION
    Replies: 2
    Last Post: 2nd May 2014, 06:47 PM
  2. Cocus wood bagpipe
    By Phil93 in forum MUSICAL INSTRUMENTS
    Replies: 7
    Last Post: 2nd July 2012, 06:02 PM
  3. Restoration,, repair finishing question
    By Grahame Collins in forum FINISHING
    Replies: 3
    Last Post: 20th February 2008, 11:54 PM
  4. Restoration Job - stripping / re-finishing
    By ado in forum FINISHING
    Replies: 7
    Last Post: 12th February 2008, 08:31 PM
  5. One for restoration
    By Shaty40 in forum HAND TOOLS - UNPOWERED
    Replies: 2
    Last Post: 6th December 2004, 09:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •