Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2012
    Location
    Melbourne
    Posts
    61

    Default Anybody used U-Beaut sanding sealer.

    I've used Feast Watson's sanding sealer for guitar bodies but it's a bit cloudy and not great for transparent finishes. I've ordered this from U-Beaut SANDING SEALER - Traditional non grain filling sealer but thinking about it afterwards, I wondered whether it will work to seal after grain filler. The blurb says it designed to raise the nap of the grain which then can be sanded off but what will it do to the grain filler? I use timbermate wood filler watered down as grain filler.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2007
    Location
    belgrave
    Age
    61
    Posts
    7,934

    Default

    The sanding sealer ( which is just cut shellac ) is great over anything. And dries WAAAAAAAAAAAAY faster than the Feast and Watson version. (Which I think is pretend sanding sealer really. ) Will be dry in a few minutes as apposed to hours or longer.And no fumes. Only smells of Metho. And not for long. Again a big differance from the Feast and Watson one. And ANYTHING can be used over it.
    anne-maria.
    T
    ea Lady

    (White with none)
    Follow my little workshop/gallery on facebook. things of clay and wood.

  4. #3
    Join Date
    Nov 2005
    Location
    Darkest NSW
    Posts
    3,197

    Default

    I've used both - and wouldn't touch the FW stuff again with a barge pole.....

    These are completely different products. The Ubeaut stuff is what I thought a sanding sealer is supposed to be; thin, clear, dries fast then just lightly sand off the raised grain and you're set to apply a finish. These days I tend to just thin down Ubeaut white shellac so I don't have to buy two different products.....

    The FW sanding sealer has a massive amount of dissolved solids. When I went to stir the can I bought, I found a huge lump of putty-like material in the bottom of the can. After 15 minutes vigorous stirring this eventually dissolved into the mix, but the resulting liquid is very thick and cloudy as you say.

    Not sure if its true, but someone told me the FW product is intended to be painted over, and therefore has a lot of solids to completely fill the grain and leave a completely smooth surface for paint. Not what you want if you're looking to put a good clear oil or urethane finish on top.

  5. #4
    Join Date
    Jun 2012
    Location
    Melbourne
    Posts
    61

    Default

    Awesome. Thanks for the info. I'm looking forward to using it.

  6. #5
    Join Date
    May 2012
    Location
    Canberra
    Posts
    1,820

    Default FW was a disaster for me

    I did three projects with the FW.

    The first, which was simple turned out great.

    The next was a fairly substantial table. This was a god damned bloody disaster of the first magnitude. I had to sand it all off and it buggered up about 10 belts and a dozen pads for my Rotex ROS. If the can hadn't cost me $30 I would've thrown it down the driveway... I'm known as a patient and slow tempered guy (seriously, this was for a resto on a families table made by their grand dad and stuffing it up would have been Very Uncool.)

    Now, I am so wary of it, its on my shelf never to move again. This ins't falling off a horse stuff, this was being in-the-chair at the Inquisition kind of avoidance.

    I like the earlier posters, subsequently made up some 50/50 shellac/turps. Fantastic. Not as "filler-ey" but two coats (drys like lightning) and it was sanding time. Happy Evan!

    Here was my initial positive review: Cabots Cabothane Clear and Feast Watson Sanding Sealer Review | Time On The Tools

    Shows that it is good to keep an open mind.

  7. #6
    Join Date
    Jun 2012
    Location
    Melbourne
    Posts
    61

    Default

    Quote Originally Posted by Evanism View Post
    I did three projects with the FW.

    The first, which was simple turned out great.

    The next was a fairly substantial table. This was a god damned bloody disaster of the first magnitude. I had to sand it all off and it buggered up about 10 belts and a dozen pads for my Rotex ROS. If the can hadn't cost me $30 I would've thrown it down the driveway... I'm known as a patient and slow tempered guy (seriously, this was for a resto on a families table made by their grand dad and stuffing it up would have been Very Uncool.)

    Now, I am so wary of it, its on my shelf never to move again. This ins't falling off a horse stuff, this was being in-the-chair at the Inquisition kind of avoidance.

    I like the earlier posters, subsequently made up some 50/50 shellac/turps. Fantastic. Not as "filler-ey" but two coats (drys like lightning) and it was sanding time. Happy Evan!

    Here was my initial positive review: Cabots Cabothane Clear and Feast Watson Sanding Sealer Review | Time On The Tools

    Shows that it is good to keep an open mind.
    How does the first project look now Evan? I think the FW sinks into the grain months after. The only body I've painted without it still has a beautiful shine. It was a kit guitar that was already sealed. All the others I can see grain showing even after waiting a month after clear coating to cut and polish.

  8. #7
    Join Date
    Sep 2018
    Location
    RaymondTerraceNSW
    Age
    68
    Posts
    2

    Default

    I bought the U Beaut sanding sealer but unsure when to use it. I am turning pens at the moment sanding at 120, 180, 240, 400, and then into Micro Mesh down to 15000 or EEE Polish and then finishing off with an oil results are variable probably due to me anyway.

Similar Threads

  1. sanding sealer
    By chris casey in forum FINISHING
    Replies: 3
    Last Post: 13th October 2008, 09:48 AM
  2. Ubeaut Sanding Sealer vs Stewmac sanding sealer
    By gbx78 in forum MUSICAL INSTRUMENTS
    Replies: 20
    Last Post: 19th August 2008, 02:57 PM
  3. Sanding sealer help
    By Hickory in forum FINISHING
    Replies: 3
    Last Post: 26th April 2008, 11:21 PM
  4. RE: U Beaut shellac & sanding sealer...
    By fanlee in forum FINISHING
    Replies: 2
    Last Post: 23rd June 2006, 12:59 PM
  5. Sanding Sealer or Grain Sealer
    By Strungout in forum FINISHING
    Replies: 3
    Last Post: 4th October 2004, 12:03 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •