Thread: Containers for French Polish etc

I colour code mine;
Jim Beam Bottles for Orange Shellac
Frigate Rum for Buttonlac
Teachers Scotch for Blond Shellac.

Works really well and it's fun getting new containers when needed


Cheers

Steve

I use bottles such as the ones used for vinegar or soy sauce for the polish, wider topped glass jars for the used rubbers. Sealable one of course.
A few tips.
If you have oil to wipe off you may be using too much. A smear is all you should see. remove that by all means. A touch on a fingertip to the rubber should be all you need.
If you have runs it's too wet. The idea is very thin layers which dry quickly. Don't worry if you seem to have missed a bit. resist the temptation to just put a layer on that bit alone. It will sort out eventually.
I was taught to concentrate on the edges because when you have got those right you'll find the middle has looked after itself. Starting at the edges and leaving them tends to cause most trouble with beginners.
You use less pressure when the rubber is moist and more as it is worked out. Rather like a toothpaste tube as you work to the end.
Try and have a few jobs going at the same time. It helps avoid the temptation of putting, "just one more layer on".
When it finally comes together there is no finish like it (which is heresy to some people I know)

Originally Posted by fineboxes

I colour code mine;
Jim Beam Bottles for Orange Shellac
Frigate Rum for Buttonlac
Teachers Scotch for Blond Shellac.
Works really well and it's fun getting new containers when needed

Never trust a french polisher with stains around his mouth.

Thanks Jim

If you have oil to wipe off you may be using too much. A smear is all you should see. remove that by all means. A touch on a fingertip to the rubber should be all you need.

I suspected that I might be using too much oil, as everything I read describes it as a few drops, but when I started to use it things became so much easier that I probably went overboard. Without it the rubber starts to stick too easily and make track marks instead of making a smooth surface. Could this be because the polish is too thick? Not dry enough? Too dry?

If you have runs it's too wet. The idea is very thin layers which dry quickly. Don't worry if you seem to have missed a bit. resist the temptation to just put a layer on that bit alone. It will sort out eventually.
......
Try and have a few jobs going at the same time. It helps avoid the temptation of putting, "just one more layer on".

I have definitely been guilty of not leaving well enough alone. And trying to speed things up by adding another coat too soon. And attempting to fit in another layer at twilight in poor light so I can let it dry overnight..... All resulting in going backwards.

I was always told French Polishing is really hard, almost impossible to get a good result unless you do everything perfectly - but it seems I need to let let the small imperfections go, and trust that it will sort out eventually, rather than meddle and cause MAJOR imperfections..... And be more patient.

As for having a few projects on the go.....is it a bad sign of obsession when you start roaming the house looking for things to refinish so you can practice on them?

I was taught to concentrate on the edges because when you have got those right you'll find the middle has looked after itself. Starting at the edges and leaving them tends to cause most trouble with beginners.
You use less pressure when the rubber is moist and more as it is worked out. Rather like a toothpaste tube as you work to the end.

Thats exactly the kind of tip I need! Will attack the edges first next time.

Thanks Heaps
Megan

You do it all in one go but concentrate on getting the edges right. It's starting and leaving the work that seems to cause most trouble and that's usually at the edges. A bit like using too much pressure on a paint brush when beginning the stroke and finishing off so that you slip over the edge and leave it messy.
The most work in French Polishing is before you even touch a rubber. It's hard to get a thin even layer if you don't have a really good finish on the wood. The best french polishing shows off the wood rather than hiding its imperfections.
Get all the dust off after sanding, a tack cloth is handy for that.
It is worth remembering that some of the best french polishing was done in less than ideal conditions. Imagine London in the winter - no wonder some polishers turned to drinking it instead.

Storage containers:

• Zip lock plastic bags.... Great for storing a rubber in for short periods of time - up to a couple of months
• Glas jars.... Ideal for storing shellac and rubber best if they have an air tight lid.
• PET bottles are good for shellac... Coke and most soft drink bottles are now PET We package and sell our shellac in PET bottles with flip top lids especially for french polishers.
• Glass bottles.... like Worcestershire Sauce type bottles or any bottle with a drip type hole on the opening make good shellac dispensers.
• Cling wrap.... Great for wrapping around the bristles of a brush to stop it drying out (good for a day or so)
• TIN CANS.... Should NEVER be used to store shellac. Flake or powder shellac (yes there is a powdered shellac) will be degraded if kept in tin. Mixed shellac (liquid shellac) will go black if stored in tin. Even a few minute bits of metal from steel wool will darken and degrade shellac.

Couple of quick tips:

All shellac will settle out and separate when left to stand for even a short time, so always shake or stir shellac before use to get the best use out of it.

Shellac has a shelf life and unless it is top notch shellac mixed with 100% Industrial Methylated Spirits (100%IMS) it could have a shelf life of as little as a few months.

If your flakes do not mix down completely within a couple of hours of adding the alcohol then the flakes are no good or the alcohol is rubbish and contains too much water.

Buy 100%IMS or 95%IMS for your shellac. If it doesn't say Industrial Methylated Spirits on the bottle or tin then it's a fair bet it will have too much water in it to use with good shellac.

If buying shellac in a premixed form make sure the bottle has a best by date on it, get the bottle with the longest best by date or go elsewhere.

Just because a shop has shellac in dry or premixed form on the shelf doesn't mean it will be good quality as it may have been on the shelf or a year or more or stored in adverse conditions (too much bright light, too hot).

If buying white shellac buy it in liquid form with a best by date on the bottle. If you buy it in powdered form it may well be all but useless as it has a very short shelf life if not stored at a constant 4°C -8°C. A couple of hot days on the shelf could see it ruined.

Hope this is of some help and hasn't completely turned the brain to moosh.

Cheers - Neil

Shellac flakes in pet jar ready for mixing with 1 it IMS Pics stolen from U-Beaut Polishes

Shellac in PET Bottle

Have you contacted Lidcombe College of Tafe? They run French Polishing courses.