Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Edging for mahogany veneer
-
26th April 2009, 10:35 AM #1GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Edging for mahogany veneer
I am building a cabinet from chipboard covered with mahogany veneer ( as delivered).
I would appreciate any suggestions as to what timber to use as edging, so that after staining the edging is not obvious against the mahogany veneer
regards,
Jill
-
26th April 2009 10:35 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th April 2009, 11:22 AM #2
G'day Jill,
I was thinking maybe a matching veneer edging may be found at one of the usual suppliers, or had you thought of going the other way and edging with a totally different wood for contrast.
Just my 2 cents worth
-
27th April 2009, 06:22 PM #3
In a recent FWW magazine they demonstrated harvesting edge banding from a veneered board to get an exact match.
-
27th April 2009, 08:40 PM #4GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Thanks mat, that sounds interesting slicing 1mm veneer off MDF. Do you recall which month, please?
-
27th April 2009, 11:14 PM #5" making wood good"
- Join Date
- May 2008
- Location
- Hervey Bay QLD
- Posts
- 319
try sharps plywood they sell 2mm glued or unglued solid timber edgings in just about species and any width you need 2.4 mtr lengths and bundles of ten .cheers
-
28th April 2009, 08:53 AM #6GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Thanks for this, chowcini. What town are Sharps Plywood located, please?
-
1st May 2009, 05:33 PM #7
Jill
Feb 09 FWW
-
1st May 2009, 08:22 PM #8GOLD MEMBER
- Join Date
- Mar 2008
- Location
- Townsville, Nth Qld
- Posts
- 4,236
Many thanks for this, Matt, I shall chase it up
kind regards,
Jill
-
1st May 2009, 11:11 PM #9
Jill,
try Tekform, Finns panels or Nover, all cabinet maker's supplier's located in Townsville.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
Similar Threads
-
Box edging?
By sinners in forum BOX MAKINGReplies: 10Last Post: 29th March 2009, 09:03 PM -
2ml.PVC EDGING
By JOHNSDOT in forum WOODWORK - GENERALReplies: 6Last Post: 15th May 2008, 04:43 PM -
Mahogany veneer
By tedworth in forum MARQUETRY and INTARSIAReplies: 2Last Post: 5th June 2007, 10:15 AM -
Edging
By Grunt in forum WOODWORK - GENERALReplies: 1Last Post: 3rd May 2004, 09:57 PM