Thread: Finish on a guitar body
30th Jul 2019, 02:39 PM #1SENIOR MEMBER
- Join Date
- Sep 2011
- Valla Beach
Finish on a guitar body
Hi all, I wanted to share a finish I am putting onto a guitar body. Telecaster shape made from Australian Red Cedar. I sanded to 2000 grit initially. Then I applied about a dozen or so coats of WOP (made by myself), First two coats were buffed in with 2000 grit W&D so it sort of wiped any excess back into the timber again. Then after that each coat was wiped on with soft rag and a very light rub of 2000 grit W&D between coats.
I then gave it two days for drying and I then used a bottle of Behlens Buffing Polish I bought a couple of weeks ago. Applied it lightly cutting in with 0000 steel wool and then buffing/polishing by hand with a soft rag.
The finish is amazing, I hope these photos do justice.
30th Jul 2019 02:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Advertising world
By dai sensei in forum CASTING & STABILISATIONReplies: 4Last Post: 30th Sep 2017, 10:46 AM
By dlannetts in forum MUSICAL INSTRUMENTSReplies: 3Last Post: 21st Jan 2012, 12:31 PM
By old_picker in forum FINISHINGReplies: 8Last Post: 13th Jul 2005, 08:51 AM
By Strungout in forum FINISHINGReplies: 0Last Post: 22nd Sep 2004, 06:55 AM
By Strungout in forum WOODWORK - GENERALReplies: 1Last Post: 28th Jul 2003, 06:40 PM