Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
20th August 2007, 08:01 AM #1New Member
- Join Date
- Aug 2007
- Location
- sydney
- Posts
- 1
finishing merbau deck with floods spa & deck
Hi I have just finished building a deck with merbau hardwood.
I have followed instructions from previous threads about using napisan and oxalic acid to remove dirt and tannins from the timber.
All went well thanks for the advice.
Now i am ready to finish with flood spa and deck(another great tip i got from the forum) but the problem is that we have copped alot of rain in sydney over the weekend and the timber is soaked.
I know that i should apply this product while the timber is wet, but my question is should i let it dry out fully then give it a light soaking again or is it possible to finish when the timber is water logged
any advice would be great.............thanks
-
20th August 2007 08:01 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th September 2007, 09:27 AM #2
probably best to let it try out a bit, just to be on the safe side, you dont want to waste all that time and it go wrong!
Similar Threads
-
Help with deck finishing
By aussieorchid in forum FINISHINGReplies: 8Last Post: 24th January 2007, 10:34 AM -
Chasing Down Prices and Services for Merbau
By barrysumpter in forum WOODWORK - GENERALReplies: 17Last Post: 15th December 2001, 03:07 PM