Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 4 of 4

Thread: Floor polish

  1. #1
    Join Date
    Sep 2008
    Location
    Blue Mountains
    Posts
    39

    Default Floor polish

    I've put down a stringy bark floor and, oiled it with a 50/50 mix of linseed oil and gum turpentine then buffed it up with a floor polisher. It looks fantastic but, after a few months of use I think it needs freshening up. I could apply a bit more oil and rebuff but that'd mean pretty much emptying the house first. Not keen on that!
    Can anyone recommend a floor polish suitable for an oiled floor? The only ones in the local hardware all seem to be for hardened finishes.

    Cheers
    Don

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2011
    Location
    bilpin
    Posts
    3,567

    Default

    Gemini floor polish. Available from Peerless at Seven Hills.
    Normally, when I do floors I use at least 2 coats of oil and often 3 if the timber is still hungry and then polish.

  4. #3
    Join Date
    Feb 2011
    Location
    Melbourne
    Posts
    292

    Default floor polish oils

    The Gemini product is acrylic water based and may not go too well with the Linseed oil.

    Don, get some Livos Kunos natural oil sealer, you can get them is small sample pot size, do a test in a cupboard and make sure there is no rejection issues.
    The Kunos is a floor and furniture oil and not only is it linseed oil based however has also natural resins and waxes. Your nearest outlet is in Willoughby or in Newtown.

    With Stringybark, apply a light film of oil, if it all penetrates, good, apply another coat the next day. leave on for approx 20 minutes then wipe off. if you buff the oil in, it will give you a subtle sheen to the floor. If all is good and it sounds like you have done most of your house, get a hold of a white pad and buffing machine and clean the surface first, then use the oil. Because it is not a varnish system, you can do a room at a time or just go around the larger pieces of furniture. It should then last you a number of years before you need to touch up heavy wear areas...and with no sanding either.
    Livos Australia

    <O</O

  5. #4
    Join Date
    Sep 2008
    Location
    Blue Mountains
    Posts
    39

    Default

    Many thanks. I'll look into both products.
    cheers
    Don

Similar Threads

  1. Install new kitchen or polish floor boards first
    By JJax in forum WOODWORK - GENERAL
    Replies: 10
    Last Post: 23rd June 2010, 12:11 PM
  2. Removing floor polish from carving
    By SkirlGHB in forum RESTORATION
    Replies: 1
    Last Post: 18th August 2008, 08:26 PM
  3. Scratches in Polish Floor
    By wazzaAppleTree in forum FINISHING
    Replies: 7
    Last Post: 13th December 2004, 11:53 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •