Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    1,222

    Default Fondant smother finish?

    I am making a set of fondant smoothers (icing on cakes). The examples I have been shown are raw pine.
    But I am wondering if the Ubeaut product "Food Safe" would be able to be used. Or is there a reason for them to be raw timber.
    Or is there another finish. Perhaps WOP???

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,208

    Default

    There is probably a reason why they are raw pine. Most likely to do with the timber's ability to dispel germs and to stay wet .

    From what I have seen most fondant smoothers are plastic or a sort of silicone with a few metal ones still being used.

    If using I'd pine make sure it is clear pine without wide growth rings which may be high in sap content.
    If I had to use timber I think I'd probably go for a bit of hardrock maple.

  4. #3
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    1,222

    Default

    I am using silky oak. Some pieces left over from another job. Very well seasoned.
    I'll sand down to a very fine grit and try raising the grain between grits.
    Thinking of maybe a wax rub and buff at the end.
    I am more concerned about the reaction berween the fondant and wood.
    So I think time will tell. Experimentation too. I will order some foodsafe on Mon and give it a whirl.
    Thanks for the reply.

  5. #4
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,208

    Default

    A bit of a warning.

    There are a lot of people who are highly allergic to Silky Oak. I know one man who can walk into a room and tell you if there is silky oak anywhere in that room and often anywhere in an entire house. He will break out in an almost immediate rash.

    Some timbers look good but really aren't all that good for you. For something like a fondant smoother you should stick with timbers that are tried and true and known to be pretty safe. That's one reason why pine is used for a lot of food implements, so is hard rock maple, and most close grained grained whitewoods but even then there may lurk a nasty or two. Bamboo is really big in food utensils right now.

    Hope this is of some interest and help.

    Cheers - Neil

  6. #5
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    1,222

    Default

    Ahhh bugga, now you tell me... I had not thought of that, although I had looked at other timbers like camphour but rejected it on the 'scent' factor not allergy.
    That poor bugger you describe would cark it in my MILs place, it's all silky and red cedar!

    I do have some well seasoned pine and a nice piece of beech at home. Might have to dress it up. Looks like it'll be two sets made for her now. One silky the other pine/beech. The beech is a nice buttery texture and colour, so that might be the better.Then let her choose.

    Thanks for the heads up re silky.
    Lyle.

Similar Threads

  1. Threads on finishing, finish, good finish
    By steamingbill in forum METALWORK FORUM
    Replies: 17
    Last Post: 20th January 2014, 06:53 PM
  2. Cutting 2-Pac Matt Finish to get a satin finish
    By Brendon5374 in forum FINISHING
    Replies: 8
    Last Post: 1st February 2011, 11:55 PM
  3. What finish?
    By BryanMc in forum FINISHING
    Replies: 6
    Last Post: 27th November 2006, 01:38 PM
  4. ca finish
    By schaf in forum WOODTURNING - PEN TURNING
    Replies: 8
    Last Post: 10th October 2006, 11:16 PM
  5. what finish to use?????
    By Rowan in forum FINISHING
    Replies: 2
    Last Post: 10th November 2003, 02:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •