Page 1 of 2 12 LastLast
Results 1 to 15 of 17
  1. #1
    Join Date
    Feb 2016
    Location
    Eagle Point
    Posts
    4

    Smile Food safe finishes

    Hi there, my first post..... Wanting to know what is the best finish to use on a Cheese board, just made it... out of 'Fiddleback'
    Needs to be food safe and enhance timber grain. Thanks to anyone out there who can offer information to this newbie....

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2004
    Location
    Perth WA
    Posts
    2,036

    Default

    G'day Wendy and welcome. I can't help but I'm interested in what is offered. Someone will come along shortly.
    Experienced in removing the tree from the furniture

  4. #3
    Join Date
    Jun 2003
    Location
    Sunbury, Vic
    Age
    84
    Posts
    2,725

    Default

    Food safe Plus by our "benevolent dictator"
    Tom

    "It's good enough" is low aim

  5. #4
    Join Date
    Oct 2014
    Location
    Caroline Springs, VIC
    Posts
    1,645

    Default

    liquid paraffin available at your local chemist (used as a mild laxative)

  6. #5
    Join Date
    Aug 2012
    Location
    Bargara Qld
    Posts
    31

    Default

    Rice Bran Oil, used for cooking, nice and thin, soaks in well and almost no odor when fresh.
    odour disappears after drying off.
    i have used it on chopping boards, pizza servers, cheese boards etc for a few years without issues.

    regards
    bob

  7. #6
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    1,809

    Default

    I use UBeaut Hard Shellac. It dries quickly, enhances the timber beautifully and, once it has fully set ("crosslinked") it is heat and moisture resistant. That does not include putting it in the dishwasher!! But a quick wash off in the sink and dry with a cloth seems to do no harm at all. I use it on cheese boards, wooden carved platters and coasters and am very happy with it. I keep a small container diluted ready for use with a small "rubber" (piece of fine cotton cloth wrapped around a ball of cotton wool and tied off at the top) in the mix. When I want to finish something I put on disposable rubber gloves, open the container and squeeze the rubber almost dry. A few wipes over the surface, let it dry (a few seconds to a minute) repeat a couple of times then put aside until it hardens. If the grain stands up after the first coat then give it a quick rub over with wet and dry sandpaper (I use 1000 grit) before you re-coat. If the grain really became rough you might need to go to 320 or 400 grit to smooth it off.

    I find the polished products are useable within a week here in Queensland though the instructions say it takes 3 weeks to fully crosslink. The shellac can be ordered on-line and comes in a convenient bottle of made-up concentrate, just dilute with metho before use. The easiest product I have found. I often put a coat of food safe wax over the surface when I have finished polishing.

    I have no financial or other connection with the manufacturer or supplier - just a happy customer.
    Last edited by Xanthorrhoeas; 15th February 2016 at 05:51 PM. Reason: Disclosure

  8. #7
    Join Date
    Dec 2008
    Location
    Yarra Valley Vic oz
    Posts
    2,598

    Default

    Quote Originally Posted by Chesand View Post
    Food safe Plus by our "benevolent dictator"
    Wendy, you can find it here, FoodSafe Plus

  9. #8
    Join Date
    May 2003
    Location
    Central Coast, NSW
    Posts
    3,330

    Default

    I use 'skydd' from IKEA.
    SKYDD Wood treatment oil, indoor use - IKEA

    I think it's just mineral oil.
    Cheers
    Arron
    Apologies for unnoticed autocomplete errors.

  10. #9
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,813

    Default

    Isn't it time the responses to this question was made a sticky?

  11. #10
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    Oven-baked vegetable oil finish. Cannot be washed off.

  12. #11
    Join Date
    Feb 2016
    Location
    Eagle Point
    Posts
    4

    Default

    Thanks Arron. this looks like it gives a great finish and dead easy to apply

  13. #12
    Join Date
    Feb 2016
    Location
    Eagle Point
    Posts
    4

    Default

    Thanks for this info, and guess what, it is available close to home. winner winner..... cheers..

  14. #13
    Join Date
    Feb 2016
    Location
    Eagle Point
    Posts
    4

    Thumbs up food safe timber finish

    Thanks so much for responses out there.... useful info forwarded on... great

  15. #14
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    I carved a "wet dish" for my kitchen. Birch, maybe 5" x 12" x 2". Holder for wet scrub pads, sink stoppers and so on.
    Melted beeswax & painted it on. Into a 325 oven for 5 minutes. Wood air heats up, wax remelts. As wood air cools, sucks the
    wax (or the oil of your choice) down into the wood. Did 70 spoons and 30 forks with olive oil that way for 3mins 30 sec by the clock.
    If you reheat one of my spoons beyond 325, you could get the oil to move. Won't and can't move in boiling soup.
    No hocus-pocus, just Charles' Law from gas physics.

  16. #15
    Join Date
    Nov 2012
    Location
    Brisbane
    Posts
    1,809

    Default Important to see examples - here are some snaps of items with Hard Shellac

    As this does seem to be a recurrent question it might be good if proponents of different food-safe finishes can also provide some photos of items they have finished with a food safe product. That way, everybody knows not only what is food safe but also what it looks like. Some people will love the oiled look, others may prefer a polished look. This way they get to be better informed about the choice and the results they will get. (Photos are pretty basic phone photos.)

    The Hard Shellac looks like this on a couple of items:

    Blackwood and Huon Pine coasters with Hard Shellac.JPG Upper: Blackwood coaster, lower: Huon Pine coaster, both with Hard Shellac

    Northern Silky Oak platter and spatula with Hard Shellac.JPGCarved wooden platter, laminated Northern Silky Oak, Hard Shellac finish

Page 1 of 2 12 LastLast

Similar Threads

  1. Food-safe finishes (again)
    By Wizened of Oz in forum FINISHING
    Replies: 2
    Last Post: 30th March 2011, 09:07 AM
  2. Food safe
    By BenBrown in forum FINISHING
    Replies: 2
    Last Post: 23rd March 2011, 08:32 AM
  3. Food Safe
    By wheelinround in forum WOODIES JOKES
    Replies: 2
    Last Post: 13th January 2009, 11:53 PM
  4. Food safe finishes for Bamboo
    By woodprn in forum FINISHING
    Replies: 4
    Last Post: 6th June 2008, 05:10 AM
  5. food safe finishes??
    By Tool Man in forum FINISHING
    Replies: 12
    Last Post: 3rd April 2006, 12:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •