Thread: French polishing

White Oil is paraffin oil available from the chemist. You can use that or raw linseed oil. DO NOT USE household oil.

Cheers - Neil

Are you sure that your instructions don't mean White shellac or just shellac? Shellac is the basis for French polishing from what I can gather. You can find White Shellac here http://www.ubeaut.com.au/dewaxed.html.

Good luck, haven't tried it myself but have some shellac flakes sitting in the shed that I'm going to try when I get my next project done....

Best Polish for it is:

Metho
Turps
Linseed Oil

One third of each shaken before use to get them to mix.

As mentioned above, the oil is mineral oil, aka baby oil. I like the memories
the smell evokes when I'm polishing.

Make sure you use pure metho, available from Sceney's. I think Paint Rite store carry it.

You can dispense with using pumice atone and the like-I use Meguiar's
auto body products instead-#2 polishing compound and wax leaves a
fantastic finish.

The recipe noted previously for oil/wax is 1/3 turps/boiled linseed oil/beeswax.

I don't like the smell of oil or wax inside a draw or box, and in fact the oil
is food for the organism that makes things smell musty inside. Wax will eventually go rancid too.

Have fun

You might be interested in reading the very comprehensive tutorial on French Polishing at http://www.milburnguitars.com/fpbannerframes.html

It explains, in considerable detail, the materials used and how to use them. The FAQS page is worth reading for the info on repairing scratches, etc. on already FPed surfaces.

Originally Posted by gregoryq

baby oil. I like the memories
the smell evokes when I'm polishing.

Hmmm... Polishing what?