Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 3 of 3

Thread: Gel Wood Stains

  1. #1
    Join Date
    Aug 2008
    Location
    Sydney
    Posts
    11

    Default Gel Wood Stains

    I wish to stain plywood. I have found the water based stains e.g. Wattyl give a blotchy appearance to the timber. (Oil based stains are not recommended on plywood) I just tried the Wattyl wood gel on a scrap piece of plywood and it came up a treat without blotching and also filled in the open grain of the plywood face. However, the range of colors in this product is limited and did not have the desired stain I was after (Rosewood). I rang Wattyl today and was told that they are not continuing this line in production after December this year. I guess it didn't sell. Pity, it works famously on plywood. My question is who else does a gel wood stain in Australia. Cabots don't list one which is not surprising as they also don't sell their wood conditioner here in Australia either.

    I am aware that gel stains sit on the surface of wood unlike the traditional stains which soak in, however on plywood it appears to work better.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Aug 2008
    Location
    Sydney
    Posts
    11

    Default Updated question

    I gather with 90 reads and no replys there is no alternative gel stains in Australia. Has anyone else used the Wattyl wood gel? If I get the same response that might explain why its going out of production. LOL

  4. #3
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    2,947

    Default

    Not sure if this is what you are actually after but.........

    I have successfully stained ply using a spirit stain - Feast Watson Prooftint, the stain is used over the top of Prooftint Pine Sealer which allows the stain to even out and reduces blotchyness. Get hold of the Feast Watson booklet "Timber Finishers & Stains" which is available from most hardware/paint stores.

    Follow the directions carefully and providing you have a quality ply - furniture grade rather than construction grade - prepare it well then you should get a good result - that being said - try it on a sample before you tackle your major project.

    The only deviation from the FW book I do is to use Minwax wipe on poly as the top coat rather than their Satinproof/Glossproof. Using their products you can of course add Prooftint stain to their products to create your own one step stain/varnish if this is the way you choose to go.

    Regards,
    Bob

Similar Threads

  1. Wood stains under shellac!
    By scoobs6170 in forum FINISHING
    Replies: 4
    Last Post: 1st April 2009, 09:58 AM
  2. Ink stains
    By back yarder in forum RESTORATION
    Replies: 5
    Last Post: 8th August 2008, 08:29 PM
  3. Croda Wood stains
    By neilb in forum FINISHING
    Replies: 2
    Last Post: 24th September 2007, 06:36 PM
  4. Oil Stains
    By Shane Watson in forum FINISHING
    Replies: 3
    Last Post: 3rd October 1999, 10:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •