Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    Mar 2012
    Location
    Sydney-ish
    Posts
    1

    Default Help! Jarrah slab table/chairs...

    Hi all,
    Im after some advice to bring my jarrah slab table and bench seats back to being beautiful! They have lived outside and unloved for a couple of years. Previously to this they have been oiled and also lacquered (faded very quickly) Now I am bringing them inside, I have hit them with a Feast Watson wood cleaner to get rid of some of the grey and now want to use F W outdoor wood oil in Jarrah to help bring back the colour without sanding my butt off for months and months! (they are three metres long and blimmin hard wood, am I just being lazy? Lol) Will this work OK?
    Also, there are quite a few splits which I like, but my clothes dont, as I have gotten caught a few times on sharp edges What i would like to know, is what is the best way to get rid of the paper thin sharp bits? Is sanding and sanding and sanding the only way or is there a trick to getting rid of them?
    Thanks in advance for your help!!

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,757

    Default

    The original colour pigment in the wood surface has been destroyed by water and UV so there is no way to get back to anywhere near any original colour other than to sand it back.

    Staining will apply a colour but it will not be the same and without some practice it can look worse than the existing grey.

    So , to quote the karate kid, "Waxon - Waxoff" , or learn to love grey or risk the aged tart look.

  4. #3
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    3,260

    Default

    Sanding, sanding and more sanding is the least hardware/money intensive option. A cheap belt sander + 80 grit to get you started, then work up to 120 and then 180 grit.

    Sand in the direction of the grain.

    Let the tool do all the work (you're just there to guide it) but stop and check frequently (with a straightedge) to make sure you are keeping it level. (search the forum for belt sander and slab). It might be a bit wobbly anyway from its time outside (highlight high areas with pencil, sand till the pencil is gone, check levels and repeat)

    Fix the sharp standy-up pointy bits down with superglue if they are small; once you unstick your fingers from the top you can also see if there are cracks that'll swallow small children - these cracks are better filled with epoxy (again, search forum) or casting resin.

  5. #4
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,757

    Default

    if any of the wood is slightly soft or pukey or very weathered, then it might be better to attack it with a scraper with a filed edge first.

  6. #5
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    Nothing wrong with sanding. Could be quite a bit of fun.

    I think people get tired of sanding because of the quality of the sanding paper. I once purchased some of the lower grade paper and found that this was just wearing away the grit. I gave this to a friend who wanted it for a just in case situation.

    Well I was at his place on another occasion and he wanted to recoat the outdoor furniture(table top only). You can imagine how I felt when he gave me the sandpaper that I gave him.

    He would not allow me to go home and get the better stuff so I ended up using a knife blade as a scraper.

    Do post a before and after photo, many will be amazed by the results.

  7. #6
    Join Date
    Jan 2005
    Location
    Adelaide
    Age
    65
    Posts
    1,183

    Default

    Hi, I don't know your skill level, or what you are prepared to spend on restoring your slab, but in my opinion, a belt sander with 80git paper can bee a bit aggressive in the wrong hands.

    If you are prepared to spend about $400, I would recommend a Metabo variable orbit - random orbit sander. Product catalogue handheld powertools - Products - Metabo Australia - Power tools built by professionals for professionals

    I have had one of these for years. The large orbit is aggressive enough, starting with 80 git & you don't need to be as careful about grain direction.

    It is a lot easier to keep flat, or rather, a lot harder the dig holes than a belt sander and discs just velcro on. I recommend buying your discs' from a sand paper specialist rather than your local hardware store, & & dont be shy about changing them when they wear.

    The fine orbit will get a mirror finish on your slab before you even apply any oil if you are prepared to go that far. I regularly finish furniture to 2000 grit with my Matabo.

    Good luck

    Steve
    The fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.

  8. #7
    Join Date
    Apr 2012
    Location
    Perth
    Posts
    2

    Default Help...

    I was going to offer my services if you wanted to get the sanding done for you as I make <a href="www.jarrimber.com.au">Jarrah Furniture</a>, but now I see you are in Sydney... not Perth. Well done on having the jarrah table over there. All the best.

Similar Threads

  1. Jarrah Slab Dining Table
    By Daz-za in forum WOODWORK PICS
    Replies: 20
    Last Post: 30th December 2011, 01:56 AM
  2. Jarrah Slab Table
    By gooma in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 45
    Last Post: 9th April 2011, 12:47 PM
  3. jarrah slab table wip
    By david devine in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFF
    Replies: 10
    Last Post: 29th June 2010, 11:04 AM
  4. Jarrah dining table & chairs finished
    By Paddy in forum WOODWORK PICS
    Replies: 16
    Last Post: 28th March 2008, 04:58 PM
  5. Jarrah Silver Ash & Marri Table & Chairs
    By JackG in forum WOODWORK PICS
    Replies: 23
    Last Post: 13th July 2006, 10:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •