Results 1 to 12 of 12
  1. #1
    Join Date
    Apr 2007
    Location
    Sydney
    Posts
    3

    Default Huon Pine Finishing advice

    Hi all,

    I have a small huon pine box that I am ready to sand and finish. I am seeking some advice from anyone who can help... I was thinking about using the ubeat shellawax cream and applying it by hand and buffing by hand...? Will it be too hard by hand?

    Also, in my prep work I was wondering about using the ubeat EEE shine. Should I sand to about 600- 800 grit then use this? Or should I just sand to the finest grit I can be bothered with say around 1200 and forget the EEE?

    I want to achieve a really perfect, yet natural finish - with a high shine and smooth feel... Would anyone suggest a better way (an oil or wax)? Mind you all I have in the way of tools are mine hands... So I am looking for a hand-worked finish.

    Any help is more than greatly appreciated!

    Kind Regards.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Dec 2004
    Location
    Northen Rivers NSW
    Age
    57
    Posts
    2,837

    Default

    I think the ubeaut people suggest dewaxed white shellac;

    http://www.ubeaut.com.au/ubhome.htm

    for huon pine.


  4. #3
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,183

    Default

    Best finish I've found for Huon over the years is Dewaxed White Shellac followed by EEE.

    Sand to 800 grit , wipe down with metho or a coat of white shellac that is cut with 10 parts metho, allow to dry then a very light sand with 1200 or finer. Apply a coat or 2 of the shellac lightly hit it with your fines grit paper 1200 or above, then use EEE to cut and bring up a brilliant shine and sensual feel to the timber without it looking wet or plastic and will protect the timber from the inevitable dirty look that huon seems to get especially when oiled or waxed.

    Have tried many other ways and this is by far the best to get what you described.

    Cheers - Neil

    PS if your abrasive is clogs rapidly when sanding the Huon wipe down the timber with metho before sanding or wet sand using either water or metho. This takes away the timbers natural oils from the surface.

    DON"T use Shellawax or Shellawax Cream.

  5. #4
    Join Date
    Apr 2007
    Location
    Sydney
    Posts
    3

    Default

    Thanks a million Neil!

  6. #5
    Join Date
    Sep 2002
    Location
    Victoria,Australia
    Posts
    303

    Default

    Quote Originally Posted by ubeaut View Post
    ...This takes away the timbers natural oils from the surface...
    So the paper doesn't clog anymore, yes? Assuming it's the natural oil that's the clogging culprit.

  7. #6
    Join Date
    Dec 2004
    Location
    Northen Rivers NSW
    Age
    57
    Posts
    2,837

    Default

    Quote Originally Posted by iliad View Post
    Thanks a million Neil!

    I was first. No thumbs up for me


  8. #7
    Join Date
    Apr 2007
    Location
    Sydney
    Posts
    3

    Default

    Sorry dazzler. Excuse my rudeness! A Double for you!

    Cheers!

  9. #8
    Join Date
    Mar 2009
    Location
    tasmania
    Posts
    1

    Default question

    Quote Originally Posted by ubeaut View Post
    Best finish I've found for Huon over the years is Dewaxed White Shellac followed by EEE.

    Sand to 800 grit , wipe down with metho or a coat of white shellac that is cut with 10 parts metho, allow to dry then a very light sand with 1200 or finer. Apply a coat or 2 of the shellac lightly hit it with your fines grit paper 1200 or above, then use EEE to cut and bring up a brilliant shine and sensual feel to the timber without it looking wet or plastic and will protect the timber from the inevitable dirty look that huon seems to get especially when oiled or waxed.

    Have tried many other ways and this is by far the best to get what you described.

    Cheers - Neil

    PS if your abrasive is clogs rapidly when sanding the Huon wipe down the timber with metho before sanding or wet sand using either water or metho. This takes away the timbers natural oils from the surface.

    DON"T use Shellawax or Shellawax Cream.
    Hi Neil - after the EEE does this need any other finishing product?

  10. #9
    Join Date
    Oct 2005
    Location
    Yass
    Age
    64
    Posts
    1,196

    Default

    And would you apply the hard shellac with brush or rub it on?

    Tex

  11. #10
    Join Date
    Feb 2008
    Location
    Deloraine Tasmania
    Age
    59
    Posts
    1,092

    Default

    I've found a cloth pad is excellent for applying shellac, i normally use an piece of old flanelete shirt folded a few times into a small pad. I've also tried a brush but didn't like it much.

  12. #11
    Join Date
    Oct 2006
    Location
    Dandenong Ranges
    Age
    47
    Posts
    816

    Default

    I've followed Neil's approach before. Dewaxed White Shellac and EEE on a piece of huon a few months ago and it is perfect. No other finish on top of that. All applied with a folded up piece of cotton.



    ___________________________________________________________
    "The things I make may be for others, but how I make them is for me."

  13. #12
    Join Date
    May 2012
    Location
    waterford west qld. 4133
    Posts
    3

    Default

    A silicon based car polish works well and hand buffs to a smooth finish.

Similar Threads

  1. Gluing Huon pine
    By AlexS in forum WOODWORK - GENERAL
    Replies: 15
    Last Post: 31st May 2016, 08:50 PM
  2. blackwood and huon pine dining table
    By taskitchen in forum TIMBER
    Replies: 8
    Last Post: 12th April 2006, 09:56 PM
  3. HUON PINE - 1 species or 2 ?
    By reeves in forum TIMBER
    Replies: 11
    Last Post: 8th April 2006, 10:29 PM
  4. Another Beginner - Pine finishing
    By AshleyM in forum FINISHING
    Replies: 1
    Last Post: 4th November 2002, 08:17 AM
  5. Huon pine
    By tonks in forum WOODTURNING - GENERAL
    Replies: 5
    Last Post: 10th February 2001, 02:46 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •